StartTractorsKubota › L3130GST

Kubota L3130GST 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota L3130GST is a tractor from the Kubota 4WD Tractor series. Power comes from a three-cylinder engine; from 1.5 litres it draws 32 hp (23.1 kW). Rated output is reached at 2,700 rpm, so it works in the lower rev range.

Top speed is 27 km/h. Unladen weight is 1,480 kg.

Within the range, rated power spans from 18.2 to 116 hp; with 32.5 hp, the L3130GST sits in the lower third. Directly alongside are the B7800 with 30.4 hp below and the L3301-4WD with 33.5 hp above.

Technical data

Engine

Engine modelL3130 GSTcorrect
Power32.5 hp (23.1 kW)correct
Rated speed2,700 rpmcorrect
Cylinders3correct
Displacement1,499.4 cm³correct
AspirationE-TVCS indirect injectioncorrect

Dimensions and weights

Ground clearance360.2correct
Unladen weight1,480 kgcorrect

Drivetrain and chassis

Gearbox typeGSTcorrect
Forward gears12correct
Reverse gears8correct
Tyre sizefront 7.2-16 rear 12.4-24correct
Top speed26.7 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow50.3 l/mincorrect
Fuel tank capacity40.1 lcorrect

Other data

Height2,307.3correct

Where this model stands

Power-to-weight ratio: 15.6 kW/t (23 kW / 1.5 t)

Power class: Compact (< 40 hp)

Stronger than 19% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L3130GST have?

The Kubota L3130GST delivers 32.5 hp.

How much does the Kubota L3130GST weigh?

The unladen weight is 1,480 kg.

What engine does the Kubota L3130GST have?

3 cylinders, 1,499 cm³ displacement.

How fast does the Kubota L3130GST go?

Top speed is 26.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare