Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › Other models › AVANT 520F

Kubota AVANT 520F

Built: 2003 · Series: Other models

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota AVANT 520F is a machine built by Kubota. Production: 2003. The engine delivers 14.9 kW, with a displacement of 719 cm³. The machine is 3,300 mm long and 1,000 mm wide. The unladen weight is 885 kg. The gross vehicle weight is 960 kg. Rated output across the Kubota range ranges from 5.6 to 129 kW; the AVANT 520F sits at the bottom of that range with 14.9 kW. Its immediate neighbours are the U25-HGS below it with 14.8 kW and the BX2350D above it with 15 kW. Unladen weight across the Kubota range ranges from 490 to 11,915 kg; here the AVANT 520F sits at the bottom of that range with 885 kg. 1112 Kubota models across 46 series are on record.

Kubota – other models: the collective page of tractors outside the named ranges, from the B and L compacts (B7100, L3350) through the M range to the M7 and the smallest tractors of the 1970s, 9 to 129 kW

This page gathers the Kubota tractors the register could not assign to a named range – the Osaka group that began in 1890 as a foundry, built its first tractor in 1960 and came to North America and Europe with compact tractors in the 1970s, where it dominates the class under 50 hp to this day. The type logic: the letter gives the range – B for the compacts under 30 hp, L for the mid-range up to 60 hp, M for the full-size tractors above, BX and GR for lawn tractors – the number roughly the hp class (B7100 about 16 hp, L3350 about 33 hp, M9540 about 95 hp), D and DT four-wheel drive, HST the hydrostatic transmission, GL, GX and X equipment lines; since 2014 Kubota has also built tractors up to 170 hp with the M7 range from the Bierne plant in France. The engines are throughout Kubota's own diesels – the D and V series of 0.5 to 6.1 litres, which Bobcat, Manitou and many other makers also source.

Read on 3 more paragraphs

The register lists here 657 versions with 8.9 to 129 kW from two- to five-cylinders of 500 to 6,129 cm³, PTO outputs from 14 to 140 hp, lift capacities from 300 to 5,350 kg, unladen weights from 440 to 7,350 kg, lengths from 1,800 to 4,940 mm and widths from 900 to 2,795 mm.

Kubota is the world's largest maker of compact tractors and market leader in Japan, North America and Southeast Asia; in Europe the brand gained a foothold through municipalities, horticulture and hobby farms and is growing into agriculture with the M range.

On used tractors, operating hours, engine condition (Kubota diesels are regarded as long-lived), hydrostat or clutch, four-wheel-drive clutch, front loader and mower PTO, on younger models the exhaust aftertreatment count; parts run through the dense Kubota network.

Sources: SpecCodex register, model data: Kubota (weitere Modelle), Kubota Europe (manufacturer)

Technical data

Engine

Power14.9 kWcorrect
Displacement719 cm³correct

Dimensions and weights

Length3,300 mmcorrect
Width1,000 mmcorrect
Unladen weight885 kgcorrect
Gross vehicle weight960 kgcorrect

Where this model stands

Power-to-weight ratio: 16.8 kW/t (15 kW / 0.9 t)

Power class: Compact (< 40 hp)

Stronger than 7% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota AVANT 520F have?

The Kubota AVANT 520F delivers 14.9 kW.

How much does the Kubota AVANT 520F weigh?

The unladen weight is 885 kg.

What is the gross vehicle weight of the Kubota AVANT 520F?

960 kg.

What engine does the Kubota AVANT 520F have?

719 cm³ displacement.

What are the dimensions of the Kubota AVANT 520F?

3,300 mm × 1,000 mm.

When was the Kubota AVANT 520F built?

Production years: 2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare