Krupp F 360
Built: 1968 · Series: Other models
More machines from model year 1968
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krupp – other models: the collective page of heavy trucks and mobile cranes outside the named ranges, including the KMK crane range, 188 to 405 kW, 9.6 to 48 tonnes gross vehicle weight
This page gathers heavy commercial vehicles of the Krupp marque that the register could not assign to a named range. The Essen-based industrial group Fried. Krupp built heavy trucks alongside its steel and engineering products, and also, under the KMK code for Krupp-Mobilkran, mobile cranes; the KMK 3045 and KMK 6200 models represent this crane production here. The crane division became part of Terex Demag through the 2002 merger, after which the Krupp brand disappeared from mobile crane building.
Read on 3 more paragraphs
The register lists 16 versions here with 188 to 405 kW, cylinder counts from 3 to 6, gross vehicle weights from 9,620 to 48,000 kg, lengths from 6,510 to 13,400 mm and widths from 2,340 to 3,000 mm.
Heavy Krupp vehicles of this kind were used in construction, industrial plant building and lifting work, where they competed with makers such as Faun, Liebherr and Demag for market share in mobile cranes and heavy-duty chassis; the large lifting capacities of the KMK cranes were needed for power-plant, bridge and industrial assembly work, where components could no longer be moved by hand or with smaller equipment.
When buying used, check boom and hydraulic operating hours and the validity of the crane inspection on the crane components, frame and axle-suspension corrosion, the condition of the gearbox and brakes, and the function of the outriggers on the chassis; since Krupp no longer exists as an independent crane and truck maker, spare parts are usually only available through successor firms or specialist dealers.
Sources: SpecCodex register, model data: Krupp (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 9,570 cm³correct |
Dimensions and weights
| Length | 6,510 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 7,780 kgcorrect |
| Gross vehicle weight | 22,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Krupp F 360 weigh?
The unladen weight is 7,780 kg.
What is the gross vehicle weight of the Krupp F 360?
22,000 kg.
What engine does the Krupp F 360 have?
6 cylinders, 9,570 cm³ displacement.
What are the dimensions of the Krupp F 360?
6,510 mm × 2,500 mm.
When was the Krupp F 360 built?
Production years: 1968.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
14618cm3 A
35 GMT-AT-4X4/360
70GMT-AT-8X6/1650+2600+1650
AK701
DL 5.5 E3
ELCH L70E3
K 960
L 60 W3
L55
LF701
S801-MUSTANG
SWS 70
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.