Krone SDC 27 ELTU4
Built: 2007-2019 · Series: SDC
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SDC – range of semi-trailers from Spelle, standard class from 24 to 43 tonnes gross weight, unladen weight 3,900 to 5,860 kg, lengths up to 13.41 m
Krone, a commercial-vehicle maker from Spelle in the Emsland, runs its standard semi-trailers in the SDC range. The type designation combines the code SDC with the two-digit axle-load figure, for example SDC 24 or SDC 27, plus suffixes such as ELTU, ELTU2 to ELTU5 for electronic trailer control and braking systems in successive development stages.
Read on 3 more paragraphs
The register lists here 27 versions with unladen weights from 3,900 to 5,860 kg and gross weights from 24,000 to 43,000 kg, at lengths from 11,000 to 13,410 mm and widths from 2,400 to 2,550 mm.
The SDC range thus sits in class O4 of heavy standard semi-trailers, as towed behind tractor units in European long-haul transport for general palletised and general-cargo haulage. As the standard model of one of Europe's largest semi-trailer ranges, the SDC shapes the look of many haulage fleets. The vehicles are usually used in rotation with tractor units from different operators, so the maintenance condition can differ considerably between individual examples.
On a used example, rust on the chassis rails, the condition of axles, the braking system and suspension, kingpin and landing legs, and, depending on the body, the curtain and frame or box body count; on electronically controlled versions also the function of the trailer electronics. Spare parts run through the Krone dealer network.
Sources: SpecCodex register, model data: Krone SDC
Technical data
Dimensions and weights
| Length | 12,566 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 8,880 mmcorrect |
| Unladen weight | 4,000 kgcorrect |
| Gross vehicle weight | 41,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Krone SDC 27 ELTU4 weigh?
The unladen weight is 4,000 kg.
What is the gross vehicle weight of the Krone SDC 27 ELTU4?
41,000 kg.
Up to what speed is the Krone SDC 27 ELTU4 approved?
Approved up to 100 km/h.
What are the dimensions of the Krone SDC 27 ELTU4?
12,566 mm × 2,480 mm.
When was the Krone SDC 27 ELTU4 built?
Production years: 2007-2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SD-C
SDC
SDC 24
SDC 24-ETS
SDC 24ET
SDC 27
SDC 27 04A
SDC 27 04B
SDC 27 ELT3/610+141+131
SDC 27 ELTU,-
SDC 27 ELTU5
SDC 27 ELTU5 PLUS
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
