Krone SDC
Built: 2021-2021 · Series: SDC
Technical data
Dimensions and weights
| Length | 12,640 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 8,790 mmcorrect |
| Unladen weight | 5,090 kgcorrect |
| Gross vehicle weight | 41,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Krone SDC weigh?
The unladen weight is 5,090 kg.
What is the gross vehicle weight of the Krone SDC?
41,000 kg.
Up to what speed is the Krone SDC approved?
Approved up to 100 km/h.
What are the dimensions of the Krone SDC?
12,640 mm × 2,500 mm.
When was the Krone SDC built?
Production years: 2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SD-C
SDC 24
SDC 24-ETS
SDC 24ET
SDC 27
SDC 27 04A
SDC 27 04B
SDC 27 ELT3/610+141+131
SDC 27 ELTU,-
SDC 27 ELTU2
SDC 27 ELTU3
SDC 27 ELTU4
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.