Kraz KrAZ-214

Built: 1956-1967 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The KrAZ-214 rolled off the line in 1956-1967 as a special-purpose vehicle. The engine is rated at 151 kW. The powerplant was supplied by engine diesel engine JaAZ-206.

Length is 9 mm, with 3 mm width and 3 mm in height. Unladen, it tips the scales at 12,300 kg.

Within the range, rated power spans from 151 to 243 kW; with 151 kW, the KrAZ-214 sits at the bottom end. The next one up is the KrAZ-255 with 176 kW.

Technical data

Engine

Enginesilnik wysokoprężny JaAZ-206correct
Power151correct

Dimensions and weights

Length8, 75 mcorrect
Width2, 70 mcorrect
Height3, 18 mcorrect
Wheelbase2, 03 mcorrect
Unladen weight12 300 kgcorrect

Frequently asked questions

How much power does the Kraz KrAZ-214 have?

The Kraz KrAZ-214 delivers 151 kW.

How much does the Kraz KrAZ-214 weigh?

The unladen weight is 12,300 kg.

When was the Kraz KrAZ-214 built?

Production years: 1956-1967.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare