Start › Material handlers › Komatsu › PC600LC-8

Komatsu PC600LC-8

Series: Komatsu Material Handler

Source: https://www.komatsu.eu/en/product-archive/standard-crawler-e

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Komatsu Material Handler series from Komatsu includes the PC600LC-8. The engine delivers 439.2 hp (320.1 kW), has 6 cylinders, with a displacement of 15,240 cm³. Rated speed is 1,800 rpm. Top speed is 5 km/h. The tank holds 880.1 litres. The gearbox has 2 forward gears. The hydraulic tank holds 360.4 litres. The cooling system holds 58.3 litres. The oil fill is 40.1 litres. The electrical system runs on 24 V. The engine fitted is the SAA6D140E-5. The Komatsu Material Handler series covers 5 models. Rated output within it ranges from 439.2 to 697.5 hp; the PC600LC-8 sits at the bottom of that range with 439.2 hp. Its immediate neighbours are the PC800LC-8 above it with 503.1 hp. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSAA6D140E-5correct
Power439.2 hp (320.1 kW)correct
Rated speed1,800 rpmcorrect
Cylinders6correct
Displacement15,240 cm³correct
Aspirationturbocharged, aftercooledcorrect
Coolant capacity58.3 lcorrect
Engine oil capacity40.1 lcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct
Top speed5 km/hcorrect
System voltage24 Vcorrect

Working data

Hydraulic oil capacity360.4 lcorrect
Fuel tank capacity880.1 lcorrect

Frequently asked questions

How much power does the Komatsu PC600LC-8 have?

The Komatsu PC600LC-8 delivers 439 hp.

What engine does the Komatsu PC600LC-8 have?

6 cylinders, 15,240 cm³ displacement.

How fast does the Komatsu PC600LC-8 go?

Top speed is 5 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC1250LC-8

PC300HD-7

PC600LC-7

PC800LC-8

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare