Start › Material handlers › Komatsu › PC600LC-7

Komatsu PC600LC-7

Series: Komatsu Material Handler

Source: https://www.komatsu.eu/en/product-archive/standard-crawler-e

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the PC600LC-7, Komatsu offers a model from the Komatsu Material Handler series. The engine delivers 287 kW. Rated speed is 1,800 rpm. The gearbox has 2 forward gears. The electrical system runs on 24 V. The engine fitted is the SA6D140E-3. The Komatsu Material Handler series covers 5 models. Rated output within it ranges from 180.5 to 501.1 kW; the PC600LC-7 sits in the lower part of that range with 287 kW. Its immediate neighbours are the PC300HD-7 below it with 180.5 kW and the PC600LC-8 above it with 320.1 kW. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 7 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSA6D140E-3correct
Power287 kWcorrect
Rated speed1,800 rpmcorrect
Aspirationturbochargedcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct
System voltage24 Vcorrect

Frequently asked questions

How much power does the Komatsu PC600LC-7 have?

The Komatsu PC600LC-7 delivers 287 kW.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC1250LC-8

PC300HD-7

PC600LC-8

PC800LC-8

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare