Start › Material handlers › Komatsu › PC300HD-7

Komatsu PC300HD-7

Series: Komatsu Material Handler

The photo shows the PC800LC-8 from the same series. Source: https://www.komatsu.eu/en/product-archive/standard-crawler-e

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PC300HD-7 from Komatsu is part of the Komatsu Material Handler series. The engine delivers 180.5 kW. Rated speed is 1,900 rpm. The gearbox has 2 forward gears. The engine fitted is the SAA6D114E-2. The Komatsu Material Handler series covers 5 models. Rated output within it ranges from 180.5 to 501.1 kW; the PC300HD-7 sits at the bottom of that range with 180.5 kW. Its immediate neighbours are the PC600LC-7 above it with 287 kW. 1159 Komatsu models across 39 series are on record. The model is listed under Excavators & compaction. 6 verified figures from 1 source are on file.

Technical data

Engine

Engine modelSAA6D114E-2correct
Power180.5 kWcorrect
Rated speed1,900 rpmcorrect
Aspirationturbochargedcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct

Frequently asked questions

How much power does the Komatsu PC300HD-7 have?

The Komatsu PC300HD-7 delivers 180 kW.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PC1250LC-8

PC600LC-7

PC600LC-8

PC800LC-8

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare