Start › Crawler cranes › Kobelco › 7250-2F

Kobelco 7250-2F

Series: Kobelco Crawler Crane

The photo shows the CK1100G from the same series. Source: https://www.mascus.jp/%E4%B8%AD%E5%8F%A4%E5%BB%BA%E8%A8%AD%E

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kobelco 7250-2F belongs to the Kobelco Crawler Crane series. The engine delivers 335.9 hp (247.1 kW), with a displacement of 10,520.5 cm³. The engine comes from Hino. Torque is 1,300.1 Nm. Rated speed is 2,000 rpm. The unladen weight is 191,416 kg. Ground clearance is 457.2 mm. Top speed is 1.1 km/h. The tank holds 400.1 litres. Maximum torque is reached at 1,500 rpm. The hydraulic tank holds 600.4 litres. The engine fitted is the P11C-UN. The Kobelco Crawler Crane series covers 10 models. Rated output within it ranges from 176.8 to 370.1 hp; the 7250-2F sits in the upper part of that range with 335.9 hp. Its immediate neighbours are the CK1000-III below it with 335.6 hp and the CK2750G-2 above it with 368 hp. 98 Kobelco models across 6 series are on record. The model is listed under Cranes & access platforms. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine makeHinocorrect
Engine modelP11C-UNcorrect
Power335.9 hp (247.1 kW)correct
Rated speed2,000 rpmcorrect
Torque1,300.1correct
Speed at max. torque1,500 rpmcorrect
Displacement10,520.5 cm³correct

Dimensions and weights

Ground clearance457.2correct
Unladen weight191,416 kgcorrect

Drivetrain and chassis

Top speed1.1 km/hcorrect

Working data

Hydraulic oil capacity600.4 lcorrect
Fuel tank capacity400.1 lcorrect

Where this model stands

Power-to-weight ratio: 1.3 kW/t (247 kW / 191.4 t)

Stronger than 93% of the crawler cranes in the register — out of 56 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kobelco 7250-2F have?

The Kobelco 7250-2F delivers 336 hp.

How much does the Kobelco 7250-2F weigh?

The unladen weight is 191,416 kg.

What engine does the Kobelco 7250-2F have?

10,520 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CK1000

CK1000-III

CK1100G

CK1100G-2

CK1600G-2

CK2750G-2

CK800

CK850-II

CK850G

Sources: [1]

Tower crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare