Kaiser M 816 WRECKER
Built: 1970 · Series: Other models
More machines from model year 1970
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kaiser – other models of the M35 truck family outside the named ranges from REO to the M816 wrecker: 6×6 military trucks, 2.5-tonne payload
This page gathers vehicles of the American M35 truck family the register could not assign to a named range – from the original REO design through the M35A2 built by Kaiser Jeep to the M816 recovery vehicle. The REO Motor Car Company developed the 2.5-tonne all-wheel-drive truck in the early 1950s for the US military; from 1963 production passed to the Kaiser Jeep Corporation, later followed by AM General and BMY. The 6×6 M35, known by its payload as the Deuce and a Half, was built in numerous variants, including the M109 workshop van and the M816 recovery vehicle with a crane boom.
Read on 3 more paragraphs
The register lists here 15 versions with unladen weights from 5,795 to 11,875 kg, gross weights from 6,920 to 21,837 kg, lengths from 5,250 to 7,100 mm and widths from 2,400 to 2,500 mm.
For decades the M35 was the backbone of US armed forces tactical logistics and was passed on to numerous allied armies; today many retired examples are in the hands of civilian collectors and expedition-vehicle builders.
On a used purchase, the condition of the multifuel engine and its injection system, rust on the frame and brake lines, the condition of the portal axles and the central tyre inflation system, and – on the M816 – the condition of the winch and crane boom count; parts come through the trade in surplus military vehicles.
Sources: SpecCodex register, model data: Kaiser (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 14,011 cm³correct |
Dimensions and weights
| Length | 5,250 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 5,250 mmcorrect |
| Unladen weight | 11,875 kgcorrect |
| Gross vehicle weight | 21,837 kgcorrect |
Drivetrain and chassis
| Wheels | 10correct |
|---|
Frequently asked questions
How much does the Kaiser M 816 WRECKER weigh?
The unladen weight is 11,875 kg.
What is the gross vehicle weight of the Kaiser M 816 WRECKER?
21,837 kg.
What engine does the Kaiser M 816 WRECKER have?
6 cylinders, 14,011 cm³ displacement.
What are the dimensions of the Kaiser M 816 WRECKER?
5,250 mm × 2,500 mm.
When was the Kaiser M 816 WRECKER built?
Production years: 1970.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
