Jumbo T0 132 SE
Built: 2006 · Series: T0
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jumbo T0 – semi-trailer range from the Dutch manufacturer: 24,000 to 35,000 kg gross weight, 6,290 to 9,960 kg unladen weight, 10.9 to 13.9 m length
This page gathers the T0 range from the Dutch semi-trailer manufacturer Jumbo. The models from T0 120 D to T0 200.S4 use the number to give an approximate payload or size class, D, E, DU, DNE, SE, VE and Z mark body and axle variants, and S and S4 the newer versions of the range. As class O4 trailers they require air brakes with ABS or EBS and are subject to recurring roadworthiness testing; the semi-trailer tractor requires a category CE licence.
Read on 3 more paragraphs
The register lists here 11 versions with unladen weights from 6,290 to 9,960 kg, gross weights from 24,000 to 35,000 kg, lengths from 10,850 to 13,900 mm and widths from 2,500 to 2,600 mm.
Spanning 24 to 35 tonnes, the T0 range covers the middle to upper segment of the Dutch semi-trailer market and is used in general cargo and building-material haulage and in commercial rental, where the shorter two-axle versions serve regional transport and the longer versions long-haul work.
On a used semi-trailer, the condition of the frame and cross members, the braking system and air-suspension bellows, wear on the kingpin and landing legs, the tyres and lighting system, and on the older D and E versions the periodic-inspection history all count; parts run through the usual trailer suppliers such as BPW and SAF. The 2-inch kingpin is the common standard on these semi-trailers; whether a single axle or a tandem axle carries the load depends on the particular version and its payload step.
Sources: SpecCodex register, model data: Jumbo T0
Technical data
Dimensions and weights
| Length | 13,840 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,780 mmcorrect |
| Unladen weight | 6,290 kgcorrect |
| Gross vehicle weight | 25,200 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Jumbo T0 132 SE weigh?
The unladen weight is 6,290 kg.
What is the gross vehicle weight of the Jumbo T0 132 SE?
25,200 kg.
Up to what speed is the Jumbo T0 132 SE approved?
Approved up to 100 km/h.
What are the dimensions of the Jumbo T0 132 SE?
13,840 mm × 2,550 mm.
When was the Jumbo T0 132 SE built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
