Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 6250R

John Deere 6250R

Built: 2017–2020 · Series: 6R (2011–2018)

More machines from model year 2017

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 6250R, John Deere offers a model from the 6R (2011–2018) series. Production: 2017–2020. The engine delivers 250 hp (220.9 kW), has 6 cylinders, with a displacement of 6,800 cm³. The machine is 5,712 mm long and 2,750 mm wide. The unladen weight is 9,300 kg. Lifting capacity is 10,400 kg. Transmission: AutoPowr continuously variable. The gross vehicle weight is 15,000 kg. The 6R (2011–2018) series covers 8 models and was built 2011–2018. Rated output within it ranges from 110 to 250 hp; the 6250R sits at the top of that range with 250 hp. Its immediate neighbours are the 6230R below it with 230 hp. Unladen weight within it ranges from 6,200 to 9,300 kg; here the 6250R sits at the top of that range with 9,300 kg. 2622 John Deere models across 140 series are on record.

John Deere 6R (2011–2018) – the premium line from Mannheim: 6110R to 6250R, the number as hp class, R for full specification against 6M, PowerTech four- and six-cylinders of 4.5 and 6.8 litres, AutoPowr and DirectDrive

The 6R range of 2011 split John Deere's mid-range from Mannheim into two lines: 6M as the simpler version and 6R as the premium line with suspended cab, CommandCenter terminal and the AutoPowr (stepless) and DirectDrive (dual-clutch) transmissions. The type logic: 6 marks the series, the number the rated power in hp – 6110R about 110 hp, 6150R 150 hp, 6210R 210 hp – R the line; in 2014 the 6230R and 6250R were added, two models that with 230 and 250 hp and intelligent power management reach into the 7R class. The engines are Deere's PowerTech range: the four-cylinder of 4.5 litres in the small, the six-cylinder of 6.8 litres in the medium and big models, from the 6210R as PowerTech PSX with two-stage turbocharging; the register span of 4,500 to 6,800 cm³ shows both families.

Read on 3 more paragraphs

The register lists 8 versions with 122 to 220.9 kW from four- and six-cylinders at 2,100 rpm, unladen weights from 6,200 to 9,300 kg, gross weights from 10,800 to 15,000 kg, a lift capacity up to 10,400 kg, lengths from 4,930 to 5,712 mm and widths from 2,470 to 2,750 mm.

In its time the 6R was Germany's best-selling tractor in the class above 100 hp; in 2018 the revised generation with new nomenclature (6120R to 6250R) followed, in 2021 the 6R with the dot designation.

On used tractors, operating hours, the condition of engine and exhaust aftertreatment (AdBlue from Stage IV), AutoPowr transmission (oil-change history), front-axle and cab suspension, hydraulics and electronics and the service history at the Deere dealer count.

Sources: SpecCodex register, model data: John Deere 6R (2011–2018), John Deere Deutschland (Hersteller, Werk Mannheim)

Technical data

Engine

EnginePowerTech PSS 6, 8Lcorrect
Power250 hp (220.9 kW)correct
Cylinders6correct
Displacement6,800 cm³correct

Dimensions and weights

Length5,712 mmcorrect
Width2,750 mmcorrect
Unladen weight9,300 kgcorrect
Gross vehicle weight15,000 kgcorrect

Drivetrain and chassis

GearboxAutoPowr continuously variablecorrect

Working data

Lifting capacity10,400 kgcorrect

Where this model stands

Power-to-weight ratio: 23.8 kW/t (221 kW / 9.3 t)

Power class: Heavy (> 180 hp)

Stronger than 97% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 6250R have?

The John Deere 6250R delivers 250 hp.

How much does the John Deere 6250R weigh?

The unladen weight is 9,300 kg.

What is the gross vehicle weight of the John Deere 6250R?

15,000 kg.

What engine does the John Deere 6250R have?

6 cylinders, 6,800 cm³ displacement.

How much does the rear linkage of the John Deere 6250R lift?

The rear linkage lifts 10,400 kg.

What are the dimensions of the John Deere 6250R?

5,712 mm × 2,750 mm.

When was the John Deere 6250R built?

Production years: 2017–2020.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
27 current listings for John Deere 6250R on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare