Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 6830

John Deere 6830

Built: 2007–2012 · Series: 6030er

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 6830 from John Deere is part of the 6030er series. Production: 2007–2012. The engine delivers 140 hp, has 6 cylinders, with a displacement of 6,788 cm³. Torque is 625 Nm. The unladen weight is 5,880 kg. Lifting capacity is 6,800 kg. The tank holds 249.8 litres. Transmission: PowrQuad-Plus 20/20 (32/32). The linkage is category II/III. The 6030er series covers 11 models and was built 2006–2013. Rated output within it ranges from 82 to 150 hp; the 6830 sits at the top of that range with 140 hp. Its immediate neighbours are the 6630 Premium below it with 130 hp and the 6930 above it with 150 hp. Unladen weight within it ranges from 4,735 to 5,880 kg; here the 6830 sits at the top of that range with 5,880 kg. 2622 John Deere models across 140 series are on record.

John Deere 6030 series (2006–2011) – Mannheim's mid-range before 6M and 6R: 6130 to 6930, Premium and Standard, the number as size class, PowerTech Plus, 60 to 114 kW

The 6030 series was John Deere's mid-range from the Mannheim plant from 2006 to 2011 – the successor to the 6020s and the range that brought the transition to Stage IIIA with the PowerTech Plus engines with common rail and EGR. The type logic continues the Mannheim tradition: the 6 stands for the series, the second digit orders the size class in ascending order – 6130 the four-cylinder entry model, 6330 and 6430 the four-cylinder mid-range, 6530 to 6930 the six-cylinders – the 30 the generation; the 6534 was an intermediate model with a four-cylinder at the output of a small six. Premium marked full equipment with AutoPowr continuously variable transmission, suspended front axle and cab suspension, Standard the simpler version – the split Deere renamed 6R and 6M in 2012.

Read on 3 more paragraphs

The register lists 11 versions with 60.4 to 114 kW (105 to 150 hp where output is recorded), 4,525 to 6,788 cm³ with four or six cylinders, torque from 399 to 696 Nm, unladen weights from 4,735 to 5,880 kg, gross weights up to 11,000 kg, lengths from 4,289 to 4,728 mm, widths from 2,275 to 2,316 mm and heights from 2,718 to 2,858 mm; the rear linkage lifts 6,800 kg.

The 6030s are regarded as one of the most reliable Mannheim generations: PowerTech Plus without particulate filter, AutoQuad or PowrQuad powershifts with long service life and cabs that anticipated the standard of the 2010s – reasons for their popularity on the used market.

On used tractors, operating hours, the condition of engine and powershift, the AutoPowr transmission and front-axle suspension on Premium models, hydraulics and loader mounting and the cab electronics are what count.

Sources: SpecCodex register, model data: John Deere 6030, John Deere Deutschland (manufacturer)

Technical data

Engine

EngineJohn Deere PowrTech 6.068 HL-281/V2-CRcorrect
Power140 hpcorrect
Torque625 Nmcorrect
Cylinders6correct
Displacement6,788 cm³correct

Dimensions and weights

Unladen weight5,880 kgcorrect

Drivetrain and chassis

GearboxPowrQuad-Plus 20/20 (32/32)correct

Working data

Lifting capacity6,800 kgcorrect
Fuel tank capacity249.8 lcorrect

Other data

Linkage categoryCat II/IIIcorrect

Where this model stands

Power-to-weight ratio: 17.5 kW/t (103 kW / 5.9 t)

Power class: Large (100–180 hp)

Stronger than 81% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 6830 have?

The John Deere 6830 delivers 140 hp.

How much does the John Deere 6830 weigh?

The unladen weight is 5,880 kg.

What engine does the John Deere 6830 have?

6 cylinders, 6,788 cm³ displacement.

How much does the rear linkage of the John Deere 6830 lift?

The rear linkage lifts 6,800 kg.

When was the John Deere 6830 built?

Production years: 2007–2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
2 current listings for John Deere 6830 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare