John Deere 5115M

Series: 5M

Source: https://www.deere.dk/da/traktorer/kompakt/5m-serien/5115m/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 5115M is a model in the 5M series. The engine delivers 115 hp (85 kW), has 4 cylinders, with a displacement of 4,500 cm³. Rated speed is 2,200 rpm. The machine is 4,562 mm long, 1,725 mm wide and 2,590 mm high. The unladen weight is 3,900 kg. The wheelbase measures 2,300 mm. Ground clearance is 480 mm. Lifting capacity is 4,441 kg. The tank holds 423.6 litres. The engine is water-cooled. The gross vehicle weight is 6,500 kg. The fuel is diesel. The linkage is category II. Rated output across the John Deere range ranges from 10.6 to 577.9 hp; the 5115M sits in the lower part of that range with 115 hp. Its immediate neighbours are the 7220 below it with 111.5 hp and the 3650 A above it with 116 hp. Rated output across the John Deere range ranges from 10.6 to 530 hp; here the 5115M sits in the lower part of that range with 115 hp. 2622 John Deere models across 140 series are on record.

John Deere 5075M and 5115M – the global 5M mid-class: three to four cylinders of 2,900 to 4,500 cm³, 55 to 85 kW, lift capacity 4,441 kg

The 5M series is John Deere's global mid-class range of general-purpose tractors, built at different group plants depending on the sales market; the 5075M and 5115M use the number after the M to denote the power step within the range. Within John Deere's letter logic, E denotes the entry class, M the mid equipment level and R the premium version; the 5M thus sits between the simpler 5E and the more comfortable 5R.

Read on 3 more paragraphs

The register lists 2 versions of 55 to 85 kW (75 to 115 hp) from three to four cylinders of 2,900 to 4,500 cm³ at 2,200 rpm, an unladen weight of 3,900 kg, a gross weight of 6,500 kg, a lift capacity of 4,441 kg, lengths from 4,561 to 4,562 mm, a width of 1,725 mm and a height of 2,590 mm.

As general-purpose tractors for field, grassland and transport work, the 5075M and 5115M are the classic size for medium family farms and compete against the comparable mid-range series from Fendt, Massey Ferguson, Case IH and New Holland.

On a used example, what counts is operating hours, the condition of clutch and gearbox, tightness of the hydraulics and any front-loader mounts, rust on the bodywork and the service history; spare parts run through John Deere's worldwide dealer network.

Sources: SpecCodex register, model data: John Deere 5M, John Deere (manufacturer)

Technical data

Engine

Fuel	dieselcorrect
Power	115 hp (85 kW)correct
Rated speed	2,200 rpmcorrect
Cylinders	4correct
Displacement	4,500 cm³correct
Aspiration	Turbocharged/Air-to-Air Aftercooledcorrect
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,562 mmcorrect
Width	1,725 mmcorrect
Height	2,590 mmcorrect
Wheelbase	2,300 mmcorrect
Ground clearance	480 mmcorrect
Unladen weight	3,900 kgcorrect
Gross vehicle weight	6,500 kgcorrect

Drivetrain and chassis

Gearbox type	Standard: 16F/16R PowrReverser Optional: 12F/4R SyncShuttle Plus 32F/16R PowrReverser Pluscorrect

Working data

Lifting capacity	4,441 kgcorrect
Fuel tank capacity	423.6 lcorrect

Other data

Linkage category	Cat IIcorrect

Where this model stands

Power-to-weight ratio: 21.8 kW/t (85 kW / 3.9 t)

Power class: Large (100–180 hp)

Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 5115M have?

The John Deere 5115M delivers 115 hp.

How much does the John Deere 5115M weigh?

The unladen weight is 3,900 kg.

What is the gross vehicle weight of the John Deere 5115M?

6,500 kg.

What engine does the John Deere 5115M have?

4 cylinders, 4,500 cm³ displacement, Diesel.

How much does the rear linkage of the John Deere 5115M lift?

The rear linkage lifts 4,441 kg.

What are the dimensions of the John Deere 5115M?

4,562 mm × 1,725 mm × 2,590 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 5 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →