Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › John Deere › 5020

John Deere 5020

Built: 1965–1972 · Series: 20

← Predecessor: 5010 · Successor: 6030 →

More machines from model year 1965

Wikimedia Commons · CC BY 2.0 · Don O'Brien from Piketon, Ohio, United States · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 5020 belongs to the 20 series. Production: 1965–1972. The engine delivers 122 hp (89 kW), has 6 cylinders, with a displacement of 8,701 cm³. The engine comes from John Deere. Rated speed is 2,200 rpm. The machine is 4,800 mm long, 2,500 mm wide and 2,450 mm high. The unladen weight is 7,800 kg. The wheelbase measures 2,650 mm. Ground clearance is 400 mm. Top speed is 20 km/h. Transmission: 8/2. The engine is water-cooled. Tyres: front 11 - 16, rear 24,5 - 32. The model was built in Waterloo, Iowa, USA. The fuel is diesel. Construction: semi-frame construction. The linkage is category III/II. Its predecessor was the John Deere 5010. The PTO runs at 1000 rpm. It was succeeded by the John Deere 6030. Around 13.000 units were built. The 20 series covers 5 models. Rated output within it ranges from 49 to 141 hp; the 5020 sits in the upper part of that range with 122 hp. Its immediate neighbours are the 4520 below it with 120 hp and the 7020 above it with 141 hp. Unladen weight within it ranges from 2,086 to 7,800 kg; here the 5020 sits at the top of that range with 7,800 kg. 2622 John Deere models across 140 series are on record.

John Deere 1520 to 7020 – the second generation of New Generation tractors from Waterloo, Iowa: 1520 and 2520 as three-cylinders, 4520 and 5020 as big six-cylinders, 7020 as the first four-wheel drive, 36 to 104 kW

With the 20 series, John Deere replaced the first New Generation range (1010 to 4010) in the mid-1960s and carried the modular principle forward: Deere's own diesel engines, staggered by cylinder count, built in the same Waterloo, Iowa plant. The model number grew with the engine size – the 1520 was the small three-cylinder for part-time farms, the 2520 its larger version, the 4520 the turbocharged six-cylinder for arable farms, the 5020 the range's strongest conventional two-axle tractor. With the 7020, Deere brought its first articulated four-wheel-drive tractor to market in 1971, topping off the 20 series and opening the way to the later 30 and 40 series.

Read on 3 more paragraphs

The register lists 5 versions with engines of 2,690 to 8,701 cm³, 3 to 6 cylinders, outputs of 36 to 104 kW and operating weights of 2,086 to 7,800 kg at 2,200 to 2,500 rpm, mostly diesel, with one model also offered with a petrol engine.

The 20 series marks Deere's transition from the pure two-axle tractor to the articulated big tractor and remains, to this day, the reference for the sturdy first generation of the company's own six-cylinder diesels.

On used tractors, oil consumption and engine compression, the condition of hydraulic pump and PTO, rust on wings and sheet metal, and on the 7020 play in the articulation joint count; engine parts are well supplied through Deere's own dealer network.

Sources: SpecCodex register, model data: John Deere 20-Baureihe, John Deere (manufacturer)

Technical data

Engine

Engine makeJohn Deerecorrect
Fueldieselcorrect
Power122 hp (89 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement8,701 cm³ (531 cu in)correct
Bore4.75 in (120.6 mm)correct
Stroke5.00 in (127 mm)correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,800 mmcorrect
Width2,500 mmcorrect
Height2,450 mmcorrect
Wheelbase2,650 mm (104 in)correct
Ground clearance400 mmcorrect
Unladen weight7,800 kg (14,510 to 19,630 lbs)correct

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox8/2correct
Front tyres11 - 16correct
Rear tyres24, 5 - 32correct
Top speed20 km/hcorrect

Working data

Fuel tank capacity68 galcorrect

Origin and approval

PlantWaterloo, Iowa, USAcorrect
Constructionsemi-frame constructioncorrect
Units built13,000correct

Other data

Linkage categoryCat III/IIcorrect
PTO speed1,000correct
PredecessorJohn Deere 5010correct
SuccessorJohn Deere 6030correct

Where this model stands

Power-to-weight ratio: 11.4 kW/t (89 kW / 7.8 t)

Power class: Large (100–180 hp)

Stronger than 75% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 5020 have?

The John Deere 5020 delivers 122 hp.

How much does the John Deere 5020 weigh?

The unladen weight is 7,800 kg.

What engine does the John Deere 5020 have?

6 cylinders, 8,701 cm³ displacement, Diesel.

How fast does the John Deere 5020 go?

Top speed is 20 km/h.

What are the dimensions of the John Deere 5020?

4,800 mm × 2,500 mm × 2,450 mm.

When was the John Deere 5020 built?

Production years: 1965–1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 36 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare