Start › Excavators & compaction › John Deere › 160D LC

John Deere 160D LC

Series: John Deere Hydraulic Excavator

Source: https://www.ritchielist.com/construction/excavators-tracked-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The John Deere 160D LC is a model in the John Deere Hydraulic Excavator series. The engine delivers 90.2 kW, has 4 cylinders, with a displacement of 4,522.8 cm³. Rated speed is 2,200 rpm. The unladen weight is 17,920.5 kg. Ground clearance is 472.4 mm. The tank holds 320.2 litres. The pump delivers 382.3 l/min. The hydraulic tank holds 196.8 litres. Working pressure is 343.4 bar. The cooling system holds 22.3 litres. The oil fill is 15.1 litres. The electrical system runs on 24 V. The engine fitted is the 4045H. The John Deere Hydraulic Excavator series covers 82 models. Rated output within it ranges from 48.5 to 396.7 kW; the 160D LC sits at the bottom of that range with 90.2 kW. Its immediate neighbours are the 160C LC below it with 81.3 kW and the 160G LC above it with 91 kW. 2153 John Deere models across 96 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine model4045Hcorrect
Power90.2 kWcorrect
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,522.8 cm³correct
AspirationTurbocharged, air-to-air charge air coolercorrect
Coolant capacity22.3 lcorrect
Engine oil capacity15.1 lcorrect

Dimensions and weights

Ground clearance472.4correct
Unladen weight17,920.5 kgcorrect

Working data

Pump flow382.3 l/mincorrect
Hydraulic oil capacity196.8 lcorrect
Hydraulic pressure343.4 barcorrect
Fuel tank capacity320.2 lcorrect

Other data

Cab height2,950.5correct
System voltage24 Vcorrect

More machines with this engine (4045H, 10)

Where this model stands

Power-to-weight ratio: 5 kW/t (90 kW / 17.9 t)

Stronger than 36% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the John Deere 160D LC have?

The John Deere 160D LC delivers 90.2 kW.

How much does the John Deere 160D LC weigh?

The unladen weight is 17,920 kg.

What engine does the John Deere 160D LC have?

4 cylinders, 4,523 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

110

120

120C

120D

135C RTS

135D

160C LC

160G LC

200 LC

200C LC

200C LC Long Front

200C LC Super Long Front

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare