JI Case 2096 (DT)
Built: 1984–1985 · Series: 96 er-Baureihe
More machines from model year 1984
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
JI Case 1896 (DT) and 2096 (DT) – six-cylinder four-wheel-drive tractors of the 96 range from Racine: turbo-diesel engines of 69.9 to 85.1 kW, 493 to 542 Nm, 5,375 to 5,386 kg
The 96 range from J.I. Case of Racine, Wisconsin, includes here the 1896 (DT) and 2096 (DT) types; the DT suffix stands for Dual Traction, the engageable four-wheel drive of these powerful farm tractors. The number sequence orders the models within the range by power, with the 2096 the stronger of the two.
Read on 3 more paragraphs
The register lists here 2 versions with 69.9 to 85.1 kW from six-cylinder diesel engines of 5,884 cm³ displacement, torques from 493 to 542 Nm at a rated speed of 2,100 rpm, weights from 5,375 to 5,386 kg, a length of 4,343 mm, a width of 2,567 mm and a height of 2,997 mm.
With a six-cylinder engine and four-wheel drive, the Case 96-series tractors occupied the upper power segment of North American arable farming and competed directly with the large four-wheel-drive models from John Deere and International Harvester; typical use was on large Midwest farms with heavy demand for pulling power for heavy cultivation implements.
Buying one of these powerful four-wheel-drive tractors used, the condition of the turbocharger and injection system, the tightness of the engine and hydraulics, the condition of the clutch and gearbox, and play in the front axle and four-wheel-drive clutch all matter. Spare parts run through today's Case IH dealer network, which as legal successor secures supply for this range.
Sources: SpecCodex register, model data: JI Case 96er-Baureihe, Case IH
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 115.7 hp (85.1 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Torque | 542 Nmcorrect |
| Speed at max. torque | 1,700 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,884 cm³correct |
| Bore | 102 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 16.5correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,343 mmcorrect |
|---|---|
| Width | 2,567 mmcorrect |
| Height | 2,997 mmcorrect |
| Wheelbase | 2,743 mmcorrect |
| Ground clearance | 406 mmcorrect |
| Unladen weight | 5,386 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/3 Rcorrect |
| Front tyres | 11.00-16 ASF (DT: 16.9-26 AS)correct |
| Rear tyres | 18.4-38 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 15.8 kW/t (85 kW / 5.4 t)
Power class: Large (100–180 hp)
Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the JI Case 2096 (DT) have?
The JI Case 2096 (DT) delivers 116 hp.
How much does the JI Case 2096 (DT) weigh?
The unladen weight is 5,386 kg.
What engine does the JI Case 2096 (DT) have?
6 cylinders, 5,884 cm³ displacement, Diesel.
How fast does the JI Case 2096 (DT) go?
Top speed is 30 km/h.
What are the dimensions of the JI Case 2096 (DT)?
4,343 mm × 2,567 mm × 2,997 mm.
When was the JI Case 2096 (DT) built?
Production years: 1984–1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.