Jenz AZ 960 DXL
Built: 2007-2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jenz – other models: the collective page of mobile wood chippers on trailer chassis outside the named ranges, from the AZ series to HEM820DL, gross weight 15,000 to 34,000 kg
Jenz of Petershagen builds mobile wood chippers on trailer chassis for reducing raw timber to wood chips; this page gathers the models outside the named ranges, including the AZ series, the HEM sizes, the BA926D and MU 2000D models and the machine named HACKER.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 13,820 to 24,500 kg, gross weights from 15,000 to 34,000 kg, lengths from 7,690 to 11,720 mm and widths from 2,550 to 2,700 mm.
Trailers of this size fall into class O4 and carry, alongside the chipping unit, their own engine, an infeed system and often a crane for loading; they are used by forestry contractors, municipalities and energy-wood suppliers to process forest residues, thinnings or landscape-maintenance material into chips on site. The chipping drum or disc is usually driven by its own diesel engine, more rarely by the tractor's power take-off.
On used chippers, the condition of the knives and anvil or counter-blade, the operating hours of the drive engine, the condition of the infeed rollers and chain conveyor, crane operation, and the trailer's frame and running gear count; wear parts such as knives run through the manufacturer and specialist forestry-equipment dealers. A look at the service log shows how often the knives were turned or replaced, and the condition of the screen deck reveals neglect or the lack of it.
Sources: Kennwerte der Modelle Jenz (weitere Modelle), Jenz (Hersteller)
Technical data
Dimensions and weights
| Length | 10,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 24,000 kgcorrect |
| Gross vehicle weight | 34,000 kgcorrect |
Frequently asked questions
How much does the Jenz AZ 960 DXL weigh?
The unladen weight is 24,000 kg.
What is the gross vehicle weight of the Jenz AZ 960 DXL?
34,000 kg.
What are the dimensions of the Jenz AZ 960 DXL?
10,000 mm × 2,550 mm.
When was the Jenz AZ 960 DXL built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.