Start › Wheel loaders › JCB › 426BHT

JCB 426BHT

Series: JCB Wheel Loader

Source: https://www.technikboerse.com/gebraucht/radlader-255/jcb-590

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JCB 426BHT belongs to the JCB Wheel Loader series. The engine delivers 146 hp (98.4 kW), has 6 cylinders, with a displacement of 5,986.2 cm³. Torque is 588 Nm. Rated speed is 2,200 rpm. The wheelbase measures 2,901.7 mm. Ground clearance is 378 mm. The tank holds 212.4 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 220.3 l/min. The hydraulic tank holds 210.1 litres. The cooling system holds 50.3 litres. The electrical system runs on 24 V. The engine fitted is the 1006-60T. Tyre size: 17,5x25x12 ply (L2). The JCB Wheel Loader series covers 64 models. Rated output within it ranges from 36.5 to 261.6 hp; the 426BHT sits in the middle of that range with 146 hp. Its immediate neighbours are the TM320 below it with 126.7 hp and the TM320S above it with 147 hp. 752 JCB models across 38 series are on record. The model is listed under Wheel loaders. 21 verified figures from 1 source are on file.

Technical data

Engine

Engine model1006-60Tcorrect
Power146 hp (98.4 kW)correct
Rated speed2,200 rpmcorrect
Torque588correct
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement5,986.2 cm³correct
Aspirationturbochargedcorrect
Coolant capacity50.3 lcorrect

Dimensions and weights

Wheelbase2,901.7correct
Ground clearance378correct

Drivetrain and chassis

Gearbox type4 wheel drive, semi-autoshift full powershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
Tyre size17.5x25x12 ply (L2)correct
System voltage24 Vcorrect

Working data

Pump flow220.3 l/mincorrect
Hydraulic oil capacity210.1 lcorrect
Fuel tank capacity212.4 lcorrect

Other data

Height3,157.7correct

Frequently asked questions

How much power does the JCB 426BHT have?

The JCB 426BHT delivers 146 hp.

What engine does the JCB 426BHT have?

6 cylinders, 5,986 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

403

403 AGRI

406

407

407ZX

408ZX

409

409ZX

411BHT

411HT

411HT High Lift

411ZX Direct

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare