Start › Wheel loaders › JCB › 416BHT

JCB 416BHT

Series: JCB Wheel Loader

Source: https://www.technikboerse.at/gebraucht/radlader-255/jcb-590

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 416BHT from JCB is part of the JCB Wheel Loader series. The engine delivers 115.6 hp (80.5 kW), has 4 cylinders, with a displacement of 3,990.3 cm³. Torque is 439 Nm. Rated speed is 2,200 rpm. The unladen weight is 8,780 kg. The wheelbase measures 2,801.1 mm. Ground clearance is 448.1 mm. The tank holds 140.1 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 156.3 l/min. The hydraulic tank holds 125.3 litres. The cooling system holds 21.6 litres. The electrical system runs on 12 V. The engine fitted is the 1004-40TW. Tyre size: 17,5x25x12SGL. The JCB Wheel Loader series covers 64 models. Rated output within it ranges from 36.5 to 261.6 hp; the 416BHT sits in the lower part of that range with 115.6 hp. Its immediate neighbours are the 411HT below it with 110.5 hp and the TM 300-52 above it with 123.1 hp. 752 JCB models across 38 series are on record. The model is listed under Wheel loaders. 22 verified figures from 1 source are on file.

Technical data

Engine

Engine model1004-40TWcorrect
Power115.6 hp (80.5 kW)correct
Rated speed2,200 rpmcorrect
Torque439correct
Speed at max. torque1,400 rpmcorrect
Cylinders4correct
Displacement3,990.3 cm³correct
Aspirationturbochargedcorrect
Coolant capacity21.6 lcorrect

Dimensions and weights

Wheelbase2,801.1correct
Ground clearance448.1correct
Unladen weight8,780 kgcorrect

Drivetrain and chassis

Gearbox type4 wheel drive, semi automatic gearbox full powershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
Tyre size17.5x25x12SGLcorrect
System voltage12 Vcorrect

Working data

Pump flow156.3 l/mincorrect
Hydraulic oil capacity125.3 lcorrect
Fuel tank capacity140.1 lcorrect

Other data

Height3,038.9correct

Where this model stands

Power-to-weight ratio: 9.2 kW/t (80 kW / 8.8 t)

Stronger than 40% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JCB 416BHT have?

The JCB 416BHT delivers 116 hp.

How much does the JCB 416BHT weigh?

The unladen weight is 8,780 kg.

What engine does the JCB 416BHT have?

4 cylinders, 3,990 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

403

403 AGRI

406

407

407ZX

408ZX

409

409ZX

411BHT

411HT

411HT High Lift

411ZX Direct

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare