Iveco/system Truck AD260S
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco System Truck – other models: heavy Iveco chassis with gross weights from 4.2 to 35 tonnes, six-cylinder engines throughout from 6.7 to 11.1 litres
Iveco was formed in 1975 from the merger of the commercial-vehicle divisions of Fiat, OM, Lancia and other European makers, and has ranked among Europe's major truck brands ever since. This page collects seven heavy Iveco chassis with designations combining letters and numbers, such as 120E T26, AD260S or AS260SY/FS-CM, the format Iveco uses to mark series and weight class. The range spans the lighter 80E T18 and 120E T26 variants through to the heaviest AD and AS chassis built for construction and heavy-duty work.
Read on 3 more paragraphs
The register lists 7 variants here, all with six cylinders and displacements from 6,728 to 11,120 cm³, kerb weights from 4,185 to 16,340 kg and gross weights from 7,490 to 35,000 kg. Lengths range from 5,230 to 11,900 mm, widths from 2,160 to 2,550 mm.
With this span from just under 7.5 to 35 tonnes, the page covers both medium-duty distribution trucks and heavy construction and tipper chassis, the kind that ran at Iveco alongside the now better-known Eurocargo and Trakker series. Chassis like these were often used by bodybuilders for tippers, concrete mixers and crane bodies.
When buying used, these older Iveco chassis need checks on frame and spring-mount corrosion and the condition of the clutch and gearbox, with the heavier variants also needing the all-wheel-drive components checked; engine and drivetrain parts run through the Iveco network, supplemented for very old series by independent commercial-vehicle specialists.
Sources: SpecCodex register, model data: Iveco System Truck (weitere Modelle), Iveco (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 11,120 cm³correct |
Dimensions and weights
| Length | 11,900 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,450 mmcorrect |
| Unladen weight | 14,385 kgcorrect |
| Gross vehicle weight | 35,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|
Frequently asked questions
How much does the Iveco/system Truck AD260S weigh?
The unladen weight is 14,385 kg.
What is the gross vehicle weight of the Iveco/system Truck AD260S?
35,000 kg.
What engine does the Iveco/system Truck AD260S have?
6 cylinders, 11,120 cm³ displacement.
What are the dimensions of the Iveco/system Truck AD260S?
11,900 mm × 2,550 mm.
When was the Iveco/system Truck AD260S built?
Production years: 2019.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
