Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Iveco/romcar › Other models › 50C/35

Iveco/romcar 50C/35 – specifications

Built: 2024 · Series: Other models

The 50C/35 comes from Iveco/romcar. Production: 2024. The engine has 4 cylinders, with a displacement of 2,998 cm³. The vehicle is 7,020 mm long and 2,210 mm wide. The unladen weight is 2,975 kg. The wheelbase measures 4,750 mm. Top speed is 160 km/h. The gross vehicle weight is 3,500 kg. The vehicle runs on 6 wheels. Unladen weight within this group ranges from 74.2 to 23,550 kg; the 50C/35 sits at the bottom of that range with 2,975 kg. Its immediate neighbours are the 1500 RHO below it with 2,973 kg and the WC62 above it with 2,977 kg. Gross vehicle weight within this group ranges from 540 to 48,000 kg; here the 50C/35 sits at the bottom of that range with 3,500 kg.

Data for the version built 2024 · Data origin: Official register · sources

More machines from model year 2024

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Iveco 50C/35 (Romcar) – chassis-cab with dual rear wheels, 4.75 m wheelbase, 3,500 kg gross weight and a third-party body

The 50C/35 type designation in the Iveco Daily range uses the letter C to denote the chassis-cab version with dual wheels on the rear axle rather than the single wheels of the S variants; the 35 in the second part of the code matches the gross vehicle weight of 3,500 kg on record. The operator Romcar fitted its own body onto this chassis, as is common for chassis-cab units in this class: cab from the vehicle manufacturer, body built to the purpose required.

Read on 3 more paragraphs

The four-cylinder diesel engine has a displacement of 2,998 cm³. At a gross vehicle weight of 3,500 kg against an unladen weight of 2,975 kg, 525 kg remain for body and load. The 4.75 m wheelbase is the longest figure on record in this chassis class, the overall length is 7.02 m, the width is 2.21 m, and the permitted top speed is given as 160 km/h.

At 3,500 kg gross weight the vehicle falls into EU class N1 and can be driven on a category B licence provided body weight and load together do not exceed the remaining 525 kg. The unusually long wheelbase combined with a comparatively short overall length points to a body that makes full use of the space between the axles rather than overhanging far behind the rear axle. Dual rear wheels spread the body's high unladen weight across four tyres, increasing stability compared with single wheels.

When buying a used chassis-cab vehicle with such a long wheelbase, it is worth checking the frame for flexing between the axles, since a long wheelbase under heavy loading is more exposed to torsional stress. With dual wheels, matching tyre pressure and tread depth on both tyres per side should be checked. Since the remaining payload of 525 kg is small, the actual unladen weight should also be weighed to reliably rule out overloading in everyday use.

Sources: SpecCodex-Register: Kennwerte des Modells 50C/35

Technical data

Engine

Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Length7,020 mmcorrect
Width2,210 mmcorrect
Wheelbase4,750 mmcorrect
Unladen weight2,975 kg (example vehicle as registered, incl. body – not a model value)correct
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed160 km/hcorrect

Frequently asked questions

What is the gross vehicle weight of the Iveco/romcar 50C/35?

The gross vehicle weight of the Iveco/romcar 50C/35 is 3,500 kg.

What engine does the Iveco/romcar 50C/35 have?

The Iveco/romcar 50C/35 has 4 cylinders and 2,998 cm³ displacement.

What are the dimensions of the Iveco/romcar 50C/35?

Dimensions of the Iveco/romcar 50C/35: length 7,020 mm, width 2,210 mm.

When was the Iveco/romcar 50C/35 built?

The Iveco/romcar 50C/35 was built in 2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​⁠‍‌​​‌‍‌⁠‌‌⁠‌‌‌‍‍⁠

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare