Iveco 50C 50C17V EURO 3
Built: 2006 · Series: 50C
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco 50C – other models: the collective page of 5-tonne chassis with box body, tipper and flatbed, 78 to 107 kW, 2.8 to 3.0-litre four-cylinders, gross weight from 3.5 to 6.6 tonnes
The Iveco 50C denotes the roughly 5-tonne weight class within Iveco's light and medium commercial-vehicle range, which builds on the Daily chassis; the three-digit number after the C denotes the power step on these vehicles, and the figure after the slash the wheelbase in centimetres. This page gathers chassis with box bodies, tippers, flatbeds and vans that the register could not assign to a named range.
Read on 3 more paragraphs
The register lists here 17 versions with 78 to 107 kW from four-cylinders of 2,800 to 3,000 cm³, unladen weights from 2,290 to 4,160 kg, gross weights from 3,500 to 6,600 kg, lengths from 6,650 to 8,700 mm and widths from 2,000 to 2,440 mm.
Between the 3.5-tonne van and the classic truck over 7.5 tonnes, the 50C fills the gap where trades, furniture hauliers and municipal services need a vehicle still driveable on an extended category B or a C1 licence while offering more payload than a van.
On a used example, rust on the chassis frame and body mounts, the condition of the clutch and gearbox under sustained load in construction or municipal use, the hydraulic cylinders on tippers, and the tightness of the load area on the box body matter; parts run through the Iveco network.
Sources: SpecCodex register, model data: Iveco 50C, Iveco (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Width | 2,000 mmcorrect |
|---|---|
| Wheelbase | 3,300 mmcorrect |
| Unladen weight | 2,290 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco 50C 50C17V EURO 3 weigh?
The unladen weight is 2,290 kg.
What is the gross vehicle weight of the Iveco 50C 50C17V EURO 3?
3,500 kg.
What engine does the Iveco 50C 50C17V EURO 3 have?
4 cylinders, 2,998 cm³ displacement.
When was the Iveco 50C 50C17V EURO 3 built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
50C
50C 11/375
50C 13-P/375
50C 50C11
50C 50C13 EURO 3
50C 50C13V EURO 3
50C 50C14 EURO 3
50C 50C14V EURO 3
50C 50C15V EURO 3
50C,VAN
50C/15
50C/18
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
