Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › 40C 11/375

Iveco 40C 11/375

Built: 1999 · Series: 40C

More machines from model year 1999

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco 40C 11/375 is a model in the 40C series. Production: 1999. The engine delivers 105 kW, with a displacement of 2,800 cm³. The machine is 6,610 mm long and 2,010 mm wide. The unladen weight is 2,680 kg. The gross vehicle weight is 4,200 kg. The 40C series covers 11 models. Rated output within it ranges from 63 to 107 kW; the 40C 11/375 sits at the top of that range with 105 kW. Its immediate neighbours are the 40C below it with 100 kW and the 40C 15/410 above it with 107 kW. Unladen weight within it ranges from 2,350 to 3,500 kg; here the 40C 11/375 sits in the lower part of that range with 2,680 kg. 3135 Iveco models across 106 series are on record.

Iveco 40C – the Daily-range chassis for bodies up to 4.2 tonnes, type codes built from weight class, power and wheelbase, EURO 3 and EURO 4 diesel engines, 63 to 107 kW

The 40C is a weight class of the Iveco Daily, the light van and chassis Iveco has built since 1978. In the type designation the first number gives the gross-weight class roughly in hundreds of kilograms, C stands for Chassis-Cab, a chassis with cab for bodies such as boxes, flatbeds or tippers, the following number the engine output in tens of horsepower, and the suffix after the slash the wheelbase in centimetres; EURO 3 and EURO 4 denote the respective emission stage.

Read on 4 more paragraphs

The register lists here 11 versions with 63 to 107 kW from four-cylinders of 2,286 to 2,998 cm³, unladen weights from 2,350 to 4,090 kg, gross weights from 3,500 to 4,200 kg and lengths from 6,000 to 8,240 mm.

The Daily and its chassis variants such as the 40C are, alongside the Mercedes-Benz Sprinter and Ford Transit, a common base in Europe for box, flatbed, tipper and municipal bodies in the 3.5-to-7-tonne bracket.

On used examples, the condition of the turbocharger and injection system, wear on the clutch and dual-mass flywheel, rust on the frame behind the cab, and on tipper and crane bodies the condition of the hydraulic system all count; parts run through the dense Iveco network.

With gross vehicle weights from 3,500 to 4,200 kg, the 40C sits just above the boundary with EU class N1, in class N2 (3.5 to 12 t); commercial use here already requires a category C1 driving licence, a tachograph and compliance with driving and rest times, whereas an otherwise identical chassis with a 3,500 kg gross weight could still be driven on a category B licence. EURO 3 already required exhaust-gas recirculation on the Daily, and EURO 4 introduced a particulate filter as standard.

Sources: SpecCodex register, model data: Iveco 40C

Technical data

Engine

Power105 kWcorrect
Displacement2,800 cm³correct

Dimensions and weights

Length6,610 mmcorrect
Width2,010 mmcorrect
Unladen weight2,680 kgcorrect
Gross vehicle weight4,200 kgcorrect

Where this model stands

Power-to-weight ratio: 39.2 kW/t (105 kW / 2.7 t)

Stronger than 7% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco 40C 11/375 have?

The Iveco 40C 11/375 delivers 105 kW.

How much does the Iveco 40C 11/375 weigh?

The unladen weight is 2,680 kg.

What is the gross vehicle weight of the Iveco 40C 11/375?

4,200 kg.

What engine does the Iveco 40C 11/375 have?

2,800 cm³ displacement.

What are the dimensions of the Iveco 40C 11/375?

6,610 mm × 2,010 mm.

When was the Iveco 40C 11/375 built?

Production years: 1999.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare