Iveco 35S18 SCATTOLINI
Built: 2019 · Series: 35S18
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco 35S18 – Daily van of the 3.5-tonne class with single tyres: 129 to 130 kW, four-cylinders from 2,298 to 2,998 cm³, lengths up to 7,250 mm, base for body builders such as Scattolini
The Daily 35S18 stands in the brand's type logic for the 3.5-tonne class (35) with single rear tyres (S); the final number 18 gives the power class of about 180 hp. The versions carried in the register range from plain vans through a variant with 12 cubic metres of load volume and automatic gearbox (3.0 12M3 AUT.) to the SCATTOLINI trim, named after the Italian body builder that fits box, refrigerated and camper bodies to Iveco chassis; EURO 4 and EURO 4 LD mark the emissions stage of the respective version.
Read on 3 more paragraphs
The register lists here 8 versions, 3 of them with recorded power of 129 to 130 kW, with displacements from 2,298 to 2,998 cm³ from four-cylinders, unladen weights from 1,980 to 2,720 kg at a gross vehicle weight of 3,500 kg, lengths from 5,990 to 7,250 mm and widths from 2,000 to 2,470 mm.
The 35S18 is the classic base for body builders: box bodies, refrigerated boxes, dropsides and motorhomes on the Daily chassis are mostly built in this weight class, which can still be driven on a standard car licence.
On a used example it is worth checking the condition of the body and its mounting to the chassis, the turbocharger and particulate filter of the EURO 4 engines, the automatic gearbox on the relevant versions, and rust on the chassis rails behind the cab, where bodies load hardest; parts are available through the Iveco network and the body builders themselves.
Sources: SpecCodex register, model data: Iveco 35S18, Iveco (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 6,070 mmcorrect |
|---|---|
| Width | 2,130 mmcorrect |
| Wheelbase | 3,450 mmcorrect |
| Unladen weight | 2,422 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Iveco 35S18 SCATTOLINI weigh?
The unladen weight is 2,422 kg.
What is the gross vehicle weight of the Iveco 35S18 SCATTOLINI?
3,500 kg.
What engine does the Iveco 35S18 SCATTOLINI have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco 35S18 SCATTOLINI?
6,070 mm × 2,130 mm.
When was the Iveco 35S18 SCATTOLINI built?
Production years: 2019.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
35S18 190/330
35S18 3.0 12M3 AUT.
35S18 EURO 4
35S18 EURO 4 LD
35S18 VAN-190/395
35S18/DG
35S18/LA02
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
