Iveco/mr 35S/MR
Built: 2020-2024 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/MR – other models: bodies on Iveco Daily chassis 35S/MR and 35S18, 2,998 cc four-cylinder engine, kerb weight 2,743 to 2,770 kg at a 3.5 t gross vehicle weight
MR is the register's name for another body builder working on the Iveco Daily. The type code 35S18 follows Iveco's type logic with the weight class around 3.5 t, the chassis variant with long wheelbase (S) and the engine output in hp; the second version is listed in the register with the MR suffix as 35S/MR.
Read on 4 more paragraphs
The register lists 2 versions with a consistently 2,998 cc displacement from four-cylinder engines, kerb weights of 2,743 to 2,770 kg at a gross vehicle weight of 3,500 kg, lengths of 6,800 to 6,850 mm and widths of 2,300 to 2,320 mm.
The narrow range in weight, length and width points to two nearly identical box bodies on the same chassis. With a payload of around 730 to 757 kg, they rank among the heavier bodies of the 3.5-tonne class built on the Iveco Daily, of the kind used for box or special-purpose bodies with a high kerb weight.
As with other bodybuilders working on the Daily, it is the chassis's ladder frame that makes heavy box bodies such as MR's possible at all, without the body itself needing to be load-bearing – a contrast with the mostly unitary-bodied competitors in this weight class.
When buying used, key points are the condition of the chassis frame under the body, corrosion at the mounting points, and the mileage and service history of the Iveco Daily's engine and gearbox. Spare parts for engine, brakes and running gear are supplied by the Iveco dealer network; for the body itself, usually only the manufacturer MR remains a source.
Sources: SpecCodex register, model data: Iveco/MR
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 6,850 mmcorrect |
|---|---|
| Width | 2,320 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,743 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Iveco/mr 35S/MR weigh?
The unladen weight is 2,743 kg.
What is the gross vehicle weight of the Iveco/mr 35S/MR?
3,500 kg.
What engine does the Iveco/mr 35S/MR have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco/mr 35S/MR?
6,850 mm × 2,320 mm.
When was the Iveco/mr 35S/MR built?
Production years: 2020-2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
