Iseki TG4490
Built: 2018 · Series: TG4000
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iseki TG4490 (TG4000 line) – compact four-cylinder diesel tractor with 35 kW, 1,200 kg lift capacity and 1,810 kg weight, built in 2018.
The TG4490 from Iseki's TG4000 line, built in 2018, is the next step up from the TG3000 line within this Japanese maker's range of compact tractors. Lines of this kind traditionally cover, at Iseki, everything from small tractors to compact all-round machines.
Read on 3 more paragraphs
The TG4490 has a four-cylinder diesel engine of 2,197 cm3 displacement, producing 35 kW (47.6 hp) at 2,600 rpm. At 1,810 kg weight and 3,450 mm length, it is noticeably stronger than the smaller lines from the same maker. Its three-point linkage lifts up to 1,200 kg.
A four-cylinder diesel of just over two litres and 35 kW sits at the border between a compact and a medium-sized general-purpose tractor, suited to front loader, mowing and light arable work. The higher lift capacity of the three-point linkage compared with smaller Iseki lines allows heavier mounted implements to be used.
On a used TG4490, the hydraulic pump and front loader mounting, where fitted, are among the wear points needing the closest inspection, since compact tractors of this size are often bought specifically for loader work. Gearbox and four-wheel-drive engagement should be checked for smooth shifting, and the power take-off for clean engagement and disengagement. Rust on compact tractors of this build tends to start at the battery tray and the footsteps, and the tyres should be checked for age cracking even at low running hours.
Sources: SpecCodex-Register: Kennwerte des Modells Iseki TG4490
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 47.6 hp (35 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,197 cm³correct |
Dimensions and weights
| Length | 3,450 mmcorrect |
|---|---|
| Unladen weight | 1,810 kgcorrect |
Working data
| Lifting capacity | 1,200 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 19.3 kW/t (35 kW / 1.8 t)
Power class: Universal (40–100 hp)
Stronger than 32% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Iseki TG4490 have?
The Iseki TG4490 delivers 47.6 hp.
How much does the Iseki TG4490 weigh?
The unladen weight is 1,810 kg.
What engine does the Iseki TG4490 have?
4 cylinders, 2,197 cm³ displacement, Diesel.
How much does the rear linkage of the Iseki TG4490 lift?
The rear linkage lifts 1,200 kg.
When was the Iseki TG4490 built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
