Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Iseki › TG3000 › TG3400

Iseki TG3400

Built: 2018 · Series: TG3000

More machines from model year 2018

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iseki TG3400 is a model in the TG3000 series. Production: 2018. The engine delivers 39.4 hp (29 kW), has 3 cylinders, with a displacement of 1,498 cm³. Rated speed is 2,600 rpm. The machine is 3,110 mm long. The unladen weight is 1,420 kg. Lifting capacity is 1,000 kg. The fuel is diesel. Rated output across the Iseki range ranges from 13 to 102 hp; the TG3400 sits in the lower part of that range with 39.4 hp. Its immediate neighbours are the TH4335 below it with 31.5 hp and the TG6370 above it with 40 hp. Rated output across the Iseki range ranges from 9.5 to 35.1 kW; here the TG3400 sits in the upper part of that range with 29 kW. 411 Iseki models across 17 series are on record.

Iseki TG3400 (TG3000 line) – compact three-cylinder diesel tractor with 29 kW, 1,000 kg lift capacity and 1,420 kg weight, built in 2018.

Iseki is a Japanese manufacturer specialising in compact tractors for smaller and medium-sized farmland, of the kind common in Japan given its small-scale field and rice-growing plots. The TG3400 from the TG3000 line, built in 2018, belongs to this class of compact general-purpose tractors.

Read on 3 more paragraphs

The TG3400 has a three-cylinder diesel engine of 1,498 cm3 displacement, producing 29 kW (39.4 hp) at 2,600 rpm. At 1,420 kg weight and 3,110 mm length, it is a light, compact tractor. Its three-point linkage lifts up to 1,000 kg, enough for mid-weight mounted implements.

A three-cylinder diesel of around 1.5 litres and just under 30 kW is a typical power unit for compact general-purpose tractors, used in landscaping, municipal grounds work and on smaller farmland. The ISO 730 three-point linkage allows the use of front loaders, mowers and small mounted implements.

When buying a used TG3400, it is worth checking the operating hours against the build year, since compact tractors of this class are often used in municipal service with high running hours and correspondingly heavy wear on the clutch and brakes. Hydraulic couplings, the power take-off and, on four-wheel-drive versions, the front axle bearings belong on the inspection, along with rust on the bonnet and wings and the condition of the tyres, which age even when running hours stay low.

Sources: SpecCodex-Register: Kennwerte des Modells Iseki TG3400

Technical data

Engine

Fueldieselcorrect
Power39.4 hp (29 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,498 cm³correct

Dimensions and weights

Length3,110 mmcorrect
Unladen weight1,420 kgcorrect

Working data

Lifting capacity1,000 kgcorrect

Where this model stands

Power-to-weight ratio: 20.4 kW/t (29 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 24% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iseki TG3400 have?

The Iseki TG3400 delivers 39.4 hp.

How much does the Iseki TG3400 weigh?

The unladen weight is 1,420 kg.

What engine does the Iseki TG3400 have?

3 cylinders, 1,498 cm³ displacement, Diesel.

How much does the rear linkage of the Iseki TG3400 lift?

The rear linkage lifts 1,000 kg.

When was the Iseki TG3400 built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare