Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Intertrac › Unitrac UT 45

Intertrac Unitrac UT 45

Built: 1969 · Series: Unitrac

More machines from model year 1969

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Unitrac UT 45 from Intertrac is part of the Unitrac series. Production: 1969. The engine delivers 45 hp (33.1 kW), has 4 cylinders, with a displacement of 2,456 cm³. The engine is water-cooled. The fuel is diesel. The fuel is diesel. Rated output within this group ranges from 2 to 760 hp; the Unitrac UT 45 sits at the bottom of that range with 45 hp. Its immediate neighbours are the 90/99 below it with 44.9 hp and the 3046R above it with 45.3 hp. Rated output within this group ranges from 5 to 585 hp; here the Unitrac UT 45 sits at the bottom of that range with 45 hp.

Intertrac Unitrac UT 45 – water-cooled four-cylinder diesel tractor with 33.1 kW (45 hp) and an eight-speed gearbox for drawbar work on medium-sized plots, built in 1969.

The Unitrac UT 45, from 1969, is a four-cylinder diesel tractor with a water-cooled engine of 2,456 cm3 displacement, producing 33.1 kW (45 hp). Names such as "Unitrac" stood, with several makers of the period, for versatile base tractors that, besides classic drawbar work, also served as carrier vehicles for mounted implements.

Read on 3 more paragraphs

The four-cylinder, water-cooled engine of 2,456 cm3 sits in the class of medium-small field tractors of the late 1960s, its 45 hp sufficient for ploughing, harrowing and light trailer work on medium-sized plots. Power reaches the wheels through an eight-speed forward gearbox, giving a fine spread of travel speeds for this power class.

A water-cooled four-cylinder diesel of around 2.4 litres was, by the late 1960s, the standard power unit for the medium family farm: strong enough for a three-furrow plough, economical enough for daily yard use. The power take-off of such tractors mostly ran at the standard 540 rpm of the period, the three-point linkage to the ISO 730 categories.

On a tractor this old, the true value depends on the condition of the crankshaft, cylinder bores and injection pump, regardless of its paperwork. An eight-speed gearbox should be checked for clean engagement of every gear and for oil leaks at the shaft seals. Rust on sheet-metal parts and the condition of the brake linkage belong on the checklist too; parts for rare models of this kind are often only found through specialists.

Sources: SpecCodex-Register: Kennwerte des Modells Intertrac Unitrac UT 45

Technical data

Engine

Fueldieselcorrect
Fueldieselcorrect
Power45 hp (33.1 kW)correct
Cylinders4correct
Displacement2,456 cm³correct
Displacement2456 cm³correct
Coolingwater-cooledcorrect
Cooling systemWassercorrect

Drivetrain and chassis

Drive typeGetriebecorrect

Other data

Getriebebearbeiten basis8vcorrect

Frequently asked questions

How much power does the Intertrac Unitrac UT 45 have?

The Intertrac Unitrac UT 45 delivers 45 hp.

What engine does the Intertrac Unitrac UT 45 have?

4 cylinders, 2,456 cm³ displacement, Diesel.

When was the Intertrac Unitrac UT 45 built?

Production years: 1969.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare