Start › Trucks over 7.5 t › International › Loadstar

International Loadstar

Built: 1970-1970 · Series: LOADSTAR

Source: https://commons.wikimedia.org/wiki/File:International_Loadst

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The International Loadstar is a machine built by International. Production: 1970. The engine delivers 130 kW, has 8 cylinders, with a displacement of 4,980 cm³. The machine is 7,650 mm long and 2,500 mm wide. The unladen weight is 6,300 kg. The gross vehicle weight is 9,100 kg. The gearbox offers 4 gears. Rated output across the International range ranges from 22 to 236 kW; the Loadstar sits in the middle of that range with 130 kW. Its immediate neighbours are the Avolavakuorma-auto (BA) 2ov 3900cm3 below it with 103 kW and the C-124-4X4/3560-63 above it with 142 kW. 507 International models across 318 series are on record. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Technical data

Engine

Power130 kWcorrect
Cylinders8correct
Displacement4,980 cm³correct

Dimensions and weights

Length7,650 mmcorrect
Width2,500 mmcorrect
Unladen weight6,300 kgcorrect
Gross vehicle weight9,100 kgcorrect

Drivetrain and chassis

Gears4correct

Where this model stands

Power-to-weight ratio: 20.6 kW/t (130 kW / 6.3 t)

Stronger than 16% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the International Loadstar have?

The International Loadstar delivers 130 kW.

How much does the International Loadstar weigh?

The unladen weight is 6,300 kg.

What is the gross vehicle weight of the International Loadstar?

9,100 kg.

What engine does the International Loadstar have?

8 cylinders, 4,980 cm³ displacement.

What are the dimensions of the International Loadstar?

7,650 mm × 2,500 mm.

When was the International Loadstar built?

Production years: 1970.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

LOADSTAR 1600

LOADSTAR 1600-10.0 T/4290

LOADSTAR 1600-10.0T/4290

LOADSTAR 1600-10.0T/4920

LOADSTAR 1600/4290

LOADSTAR 1700

LOADSTAR 1700-10.9 T/4750

LOADSTAR 1800

LOADSTAR F-1800-19.0T-6X4/4600&1270

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare