Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › International › Other models › ALL AMERICAN A3

International ALL AMERICAN A3

Built: 1999 · Series: Other models

More machines from model year 1999

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ALL AMERICAN A3 comes from International. Production: 1999. The engine has 6 cylinders, with a displacement of 7,636 cm³. The vehicle is 11,600 mm long and 2,000 mm wide. The unladen weight is 7,160 kg. The wheelbase measures 7,000 mm. The gross vehicle weight is 7,500 kg. The vehicle runs on 4 wheels. Unladen weight across the International range ranges from 1,241 to 20,088 kg; the ALL AMERICAN A3 sits in the lower part of that range with 7,160 kg. Its immediate neighbours are the BLUEBIRD 3800 below it with 7,075 kg and the 1750 above it with 7,260 kg. Gross vehicle weight across the International range ranges from 1,696 to 38,951 kg; here the ALL AMERICAN A3 sits in the lower part of that range with 7,500 kg. 643 International models across 327 series are on record.

International – other models: the collective page outside the named ranges, from DuraStar, HV and HX through LoneStar and PayStar to school bus chassis, 22 to 164 kW, diesel and electric

This page gathers the International vehicles the register could not assign to a named range – from the Cargostar and Fleetstar classics of the 1960s and 1970s through the modern DuraStar, HV, HX, LT, LoneStar, MV and PayStar ranges to school bus chassis, which International, trading as Navistar International, also builds under its IC Bus subsidiary. International Harvester, operating as Navistar International since 1986, is headquartered in Illinois; the four-digit and lettered designations historically ordered payload class and today correspond to individual ranges.

Read on 3 more paragraphs

The register lists 105 versions here with 22 to 164 kW from six- and eight-cylinder engines of 2,830 to 15,125 cm³, unladen weights of 1,950 to 20,088 kg, gross vehicle weights of 3,450 to 38,951 kg and lengths of 5,100 to 11,900 mm; the majority run on diesel, with a smaller share electric.

International covers the entire North American spectrum from medium-duty distribution trucks to heavy long-haul and construction vehicles, while also being one of the larger suppliers of school bus chassis; competitors are Freightliner, Kenworth, Peterbilt and Mack, while the bus segment competes mainly with Blue Bird and Thomas Built Buses.

When buying used, check the turbocharger and injection system on the diesel engines (including the DT-466 family), frame corrosion and air suspension condition on the chassis, safety equipment such as doors and warning lights on bus bodies, and battery condition and charge cycles on the electric versions; parts run through the Navistar International dealer network.

Sources: SpecCodex register, model data: International (weitere Modelle), International Trucks (Navistar)

Technical data

Engine

Cylinders6correct
Displacement7,636 cm³correct

Dimensions and weights

Length11,600 mmcorrect
Width2,000 mmcorrect
Wheelbase7,000 mmcorrect
Unladen weight7,160 kgcorrect
Gross vehicle weight7,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the International ALL AMERICAN A3 weigh?

The unladen weight is 7,160 kg.

What is the gross vehicle weight of the International ALL AMERICAN A3?

7,500 kg.

What engine does the International ALL AMERICAN A3 have?

6 cylinders, 7,636 cm³ displacement.

What are the dimensions of the International ALL AMERICAN A3?

11,600 mm × 2,000 mm.

When was the International ALL AMERICAN A3 built?

Production years: 1999.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare