International Harvester 464
Built: 1973–1978 · Series: 64 er-Serie
More machines from model year 1973
International Harvester 464: four-cylinder diesel or three-cylinder petrol engine of 2,934 cc, 45 hp (33.1 kW), 179 Nm torque and a top speed of 36 km/h
International Harvester's 64 series covered the lower-to-medium power segment. The 464 was offered with a different number of cylinders depending on fuel type: a four-cylinder diesel version and a three-cylinder petrol version. Both versions were offered in parallel throughout the production run, so workshops had to stock different spare parts depending on fuel type.
Read on 3 more paragraphs
The engine, with a displacement of 2,934 cc, produces 45 hp (33.1 kW) at 2,400 rpm and 179 Nm of torque. At an unladen weight of 2,327 kilograms, a wheelbase of 1,910 millimetres and a width of 1,676 millimetres, the 464 is a compact, light utility tractor.
With a design top speed of 36 km/h, the machine falls under driving licence category T. Offering both diesel and petrol versions in parallel was not unusual in the 1970s and reflected preferences and fuel availability in different sales markets. Tractors of this class typically use a standardised power take-off running at 540 rpm to drive mounted implements.
When buying a 464, it must first be established which of the two engine versions is fitted, as spare parts differ between the diesel and petrol variants. Compression, the condition of the clutch and hydraulic tightness belong in the inspection, as does corrosion on the wings and steering knuckles. A complete service history is a useful indicator of how the tractor was used over the years.
Sources: SpecCodex-Register: Kennwerte des Modells 464
Technical data
Engine
| Fuel | Diesel/Benzincorrect |
|---|---|
| Power | 45 hp (33.1 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Torque | 179 Nmcorrect |
| Speed at max. torque | 1,600 rpmcorrect |
| Cylinders | 3/4correct |
| Displacement | 2,934 cm³correct |
| Bore | 98.43 mmcorrect |
| Stroke | 128.52 mmcorrect |
| Compression ratio | 16correct |
| Injection pressure | 225 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,378 mmcorrect |
|---|---|
| Width | 1,676 mmcorrect |
| Height | 1,397 mmcorrect |
| Wheelbase | 1,910 mmcorrect |
| Ground clearance | 315 mmcorrect |
| Unladen weight | 2,327 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8 V/4 Rcorrect |
| Front tyres | 6.50-16correct |
| Rear tyres | 14.9-28correct |
| Top speed | 36 km/hcorrect |
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|---|
| Units built | 10,476correct |
Where this model stands
Power-to-weight ratio: 14.2 kW/t (33 kW / 2.3 t)
Power class: Universal (40–100 hp)
Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the International Harvester 464 have?
The International Harvester 464 delivers 45 hp.
How much does the International Harvester 464 weigh?
The unladen weight is 2,327 kg.
What engine does the International Harvester 464 have?
3/4 cylinders, 2,934 cm³ displacement, Diesel/Benzin.
How fast does the International Harvester 464 go?
Top speed is 36 km/h.
What are the dimensions of the International Harvester 464?
3,378 mm × 1,676 mm × 1,397 mm.
When was the International Harvester 464 built?
Production years: 1973–1978.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Wikipedia (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
