Ingersoll Rand ZX75
Series: Ingersoll Rand Midi Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ingersoll Rand midi excavator – register of the ZX75/ZX125 range: four-cylinder diesel engines, 53.7 to 70.1 kW, 7,501.5 to 12,853.9 kg
Ingersoll Rand is a US industrial group that, through its former construction-equipment division, also sold midi excavators in the mid-weight segment. This page gathers the register of Ingersoll Rand midi excavators with the types ZX75 and ZX125. With this division the group competed mainly against established suppliers such as Case, Komatsu and Hitachi, but only held a limited market share.
Read on 3 more paragraphs
The register lists 2 versions with 53.7 to 70.1 kW from four-cylinder diesel engines of 3,100.4 to 4,000.1 cm³ displacement at 2,200 revolutions per minute; operating weight ranges from 7,501.5 to 12,853.9 kg.
Midi excavators of this weight class handle earthworks, trenching and cable and pipe laying on tighter sites, closing the gap between compact mini excavators and large standard excavators. Since production ended decades ago, surviving examples are found today mainly in North America, where the machines were originally most common.
When buying used, check the condition of the undercarriage and track tension, the tightness of the boom, arm and bucket cylinders, the condition of the slew ring and swing gearbox, and the mileage and service history of the diesel engine; since Ingersoll Rand has long since discontinued its construction-equipment division, spare parts can now only be sourced through specialist used-parts suppliers. Checking the nameplate and serial number also clarifies the exact year of manufacture, since identical models were built over several years with minor technical changes.
Sources: SpecCodex register, model data: Ingersoll Rand Midibagger, Ingersoll Rand
Technical data
Engine
| Power | 53.7 kWcorrect |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,100.4 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Ground clearance | 408.4 mmcorrect |
|---|---|
| Unladen weight | 7,501.5 kgcorrect |
Working data
| Pump flow | 156.3 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 140.1 lcorrect |
| Hydraulic pressure | 279.9 barcorrect |
| Fuel tank capacity | 130.2 lcorrect |
Other data
| Cab height | 2,721.9 mmcorrect |
|---|
Where this model stands
Power-to-weight ratio: 7.2 kW/t (54 kW / 7.5 t)
Stronger than 16% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ingersoll Rand ZX75 have?
The Ingersoll Rand ZX75 delivers 53.7 kW.
How much does the Ingersoll Rand ZX75 weigh?
The unladen weight is 7,502 kg.
What engine does the Ingersoll Rand ZX75 have?
4 cylinders, 3,100 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.