Indespension Hudson LT35146T
Built: 2013-2019 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Indespension Hudson – other models: the collective page of trailers outside the named ranges, LT and FTL types at 2.7 and 3.5 t gross weight, 685 to 1,448 kg kerb weight, 3.81 to 5.76 m length
This page gathers the Indespension and Hudson trailers the register could not assign to a named range. Indespension is a British manufacturer of trailers for vehicle and machinery transport. The LT and FTL type designations carry the gross weight in hundreds of kilograms directly in the name: 27 stands for 2,700 kg, 35 for 3,500 kg, as shown by the LT27105 and LT35146T types; the suffixes CG, SD, LR and HB mark equipment variants such as ramps or chocks.
Read on 3 more paragraphs
The register lists 12 versions here with a kerb weight of 685 to 1,448 kg and a gross weight of 2,700 to 3,500 kg, at lengths of 3,810 to 5,760 mm and widths of 1,760 to 2,370 mm.
With gross weights of 2.7 and 3.5 t and a tilting bed, the LT and FTL trailers in this range are typical car transporters for cars, small vehicles and light machinery, widely used in the British market by breakdown services, car dealers and private owners. The match between the number in the type code and the gross weight makes it easy to read off the payload at a glance.
Buying a used car transporter means checking the load bed and the tilt or ramp mechanism, the frame and welds for corrosion, the axle units, wheel bearings and tyres, and the operation of the overrun brake with its cable. On versions fitted with a winch, also check the rope or strap and the winch brake. Parts for axles, couplings and brakes are available through the British trailer accessory trade.
Sources: SpecCodex register, model data: Indespension Hudson (weitere Modelle)
Technical data
Dimensions and weights
| Length | 5,760 mmcorrect |
|---|---|
| Width | 2,360 mmcorrect |
| Wheelbase | 4,360 mmcorrect |
| Unladen weight | 1,402 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Indespension Hudson LT35146T weigh?
The unladen weight is 1,402 kg.
What is the gross vehicle weight of the Indespension Hudson LT35146T?
3,500 kg.
Up to what speed is the Indespension Hudson LT35146T approved?
Approved up to 100 km/h.
What are the dimensions of the Indespension Hudson LT35146T?
5,760 mm × 2,360 mm.
When was the Indespension Hudson LT35146T built?
Production years: 2013-2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
