Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Impodan › Lovol 50-III

Impodan Lovol 50-III

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Impodan Lovol 50-III is a machine built by Impodan. The engine delivers 50 hp (37 kW). The engine is water-cooled. The model was built in China. The fuel is diesel. Rated output across the Impodan range ranges from 25 to 60 hp; the Lovol 50-III sits in the upper part of that range with 50 hp. Its immediate neighbours are the 254 below it with 25 hp and the 60F above it with 60 hp. Rated output across the Impodan range ranges from 19 to 45 kW; here the Lovol 50-III sits in the upper part of that range with 37 kW. 3 Impodan models are on record.

Lovol 50-III (Impodan): water-cooled diesel engine with 50 hp (37 kW), mechanical front-wheel drive (MFWD) and Chinese manufacture as a compact all-round tractor

The Lovol 50-III is sold under the Impodan brand, a Danish agricultural machinery supplier — evident from the origin of the register data and the Danish web domain. The machine is manufactured in China, as is typical of many tractors in the Lovol model family.

Read on 3 more paragraphs

The water-cooled diesel engine produces 50 hp (37 kW) and drives both axles (MFWD, mechanical front-wheel drive with a driven front axle). This makes it a compact all-round tractor in the lower-to-medium power range, designed for smaller and medium-sized farms as well as municipal use.

Mechanical front-wheel drive (MFWD) substantially improves traction on loose or wet ground compared with rear-wheel drive alone, without significantly limiting the tractor's manoeuvrability. Tractors of this power class fall under driving licence category T and typically use a standardised power take-off running at 540 rpm.

When buying a used Lovol/Impodan tractor, checks should include the condition of the four-wheel-drive hub and front axle joints, as well as the availability of spare parts through the Danish importer, since parts for Chinese-built machines are not everywhere as readily available as for established European brands. Smooth engine running, hydraulic tightness and clutch condition should be checked as with any used tractor.

Sources: SpecCodex-Register: Kennwerte des Modells Lovol 50-III, Impodan

Technical data

Engine

Fueldieselcorrect
Power50 hp (37 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantChinacorrect

Frequently asked questions

How much power does the Impodan Lovol 50-III have?

The Impodan Lovol 50-III delivers 50 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare