Technical register for agricultural, construction and commercial machinery · sourced data

Hyundai R800LC-7A

Series: Hyundai Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hyundai Hydraulic Excavator series from Hyundai includes the R800LC-7A. The engine delivers 517.1 hp (365.4 kW), has 6 cylinders, with a displacement of 14,994.2 cm³. Torque is 2,364.5 Nm. Rated speed is 1,800 rpm. The unladen weight is 82,320 kg. Ground clearance is 880.9 mm. The tank holds 940.3 litres. Maximum torque is reached at 1,400 rpm. The pump delivers 1,008.1 l/min. The hydraulic tank holds 800.2 litres. Working pressure is 343.4 bar. The cooling system holds 59.1 litres. The oil fill is 43.5 litres. The electrical system runs on 24 V. The engine fitted is the QSX15. The Hyundai Hydraulic Excavator series covers 56 models. Rated output within it ranges from 95.3 to 517.1 hp; the R800LC-7A sits at the top of that range with 517.1 hp. Its immediate neighbours are the R500LC-7A below it with 362 hp. Unladen weight within it ranges from 11,200 to 82,320 kg; here the R800LC-7A sits at the top of that range with 82,320 kg. 428 Hyundai models across 28 series are on record.

Hyundai R series: LC, D, and the -7/-7A generation tag behind the number

Hyundai's excavator lineup consistently starts with the prefix R, followed by a number for the size class and usually a letter code for the undercarriage type. LC stands for a lengthened, widened crawler track ("Long Crawler") that increases ground contact area and improves stability on soft or uneven terrain — bucket models such as R140LC-7, R160LC-7 and R180LC-7 carry this code.

Read on 3 more paragraphs

The D suffix, by contrast, marks a wheeled excavator instead of a crawler machine, as seen in this bucket's R110D-7. After the number comes the generation tag: the digit 7 marks a particular excavator generation, and the trailing A on models like R450-7A, per an industry source, denotes adaptation to a stricter emissions standard within the same generation.

The "Hyundai Hydraulic Excavator" bucket spans smaller site machines like the R110-7 up to heavyweights like the R450-7A, and across its 56 active models covers 62 to 365 kW of engine power, 11,200 to 82,320 kg operating weight, 4- to 6-cylinder engines, and torque from 371 to 2364 Nm.

Buying used, LC models are worth checking for wider track shoes and pads, which wear unevenly under intensive digging, along with the seals on the dipper and boom cylinders.

Sources: SpecCodex register, model data: Hyundai Hydraulic Excavator, CM-SV: What Do the Letters of Each Brand and Model of Excavator Mean, Machineryline: Overview of Hyundai R Series Excavators

Technical data

Engine

Engine modelQSX15correct
Power517.1 hp (365.4 kW)correct
Rated speed1,800 rpmcorrect
Torque2,364.5 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement14,994.2 cm³correct
Aspirationturbochargedcorrect
Coolant capacity59.1 lcorrect
Engine oil capacity43.5 lcorrect

Dimensions and weights

Ground clearance880.9 mmcorrect
Unladen weight82,320 kgcorrect

Working data

Pump flow1,008.1 l/mincorrect
Hydraulic oil capacity800.2 lcorrect
Hydraulic pressure343.4 barcorrect
Fuel tank capacity940.3 lcorrect

Other data

Cab height3,581.4 mmcorrect
System voltage24 Vcorrect

More machines with this engine (Cummins QSX15, 19)

Where this model stands

Power-to-weight ratio: 4.4 kW/t (365 kW / 82.3 t)

Stronger than 94% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hyundai R800LC-7A have?

The Hyundai R800LC-7A delivers 517 hp.

How much does the Hyundai R800LC-7A weigh?

The unladen weight is 82,320 kg.

What engine does the Hyundai R800LC-7A have?

6 cylinders, 14,994 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare