Technical register for agricultural, construction and commercial machinery · sourced data

Hyundai R180LCD-7

Series: Hyundai Hydraulic Excavator

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the R180LCD-7, Hyundai offers a model from the Hyundai Hydraulic Excavator series. The engine delivers 127.7 hp (86.5 kW), has 6 cylinders, with a displacement of 4,998.1 cm³. Torque is 416.2 Nm. Rated speed is 2,100 rpm. The unladen weight is 19,260 kg. Ground clearance is 460.2 mm. The tank holds 260.1 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 336.1 l/min. The hydraulic tank holds 240.4 litres. Working pressure is 323.4 bar. The cooling system holds 30.3 litres. The oil fill is 16.7 litres. The electrical system runs on 24 V. The engine fitted is the S6S-DT. The Hyundai Hydraulic Excavator series covers 56 models. Rated output within it ranges from 95.3 to 517.1 hp; the R180LCD-7 sits at the bottom of that range with 127.7 hp. Its immediate neighbours are the R140LCM-7A below it with 120.7 hp and the R210LC-7 High Chassis above it with 152.1 hp. Unladen weight within it ranges from 11,200 to 82,320 kg; here the R180LCD-7 sits at the bottom of that range with 19,260 kg. 428 Hyundai models across 28 series are on record.

Hyundai R series: LC, D, and the -7/-7A generation tag behind the number

Hyundai's excavator lineup consistently starts with the prefix R, followed by a number for the size class and usually a letter code for the undercarriage type. LC stands for a lengthened, widened crawler track ("Long Crawler") that increases ground contact area and improves stability on soft or uneven terrain — bucket models such as R140LC-7, R160LC-7 and R180LC-7 carry this code.

Read on 3 more paragraphs

The D suffix, by contrast, marks a wheeled excavator instead of a crawler machine, as seen in this bucket's R110D-7. After the number comes the generation tag: the digit 7 marks a particular excavator generation, and the trailing A on models like R450-7A, per an industry source, denotes adaptation to a stricter emissions standard within the same generation.

The "Hyundai Hydraulic Excavator" bucket spans smaller site machines like the R110-7 up to heavyweights like the R450-7A, and across its 56 active models covers 62 to 365 kW of engine power, 11,200 to 82,320 kg operating weight, 4- to 6-cylinder engines, and torque from 371 to 2364 Nm.

Buying used, LC models are worth checking for wider track shoes and pads, which wear unevenly under intensive digging, along with the seals on the dipper and boom cylinders.

Sources: SpecCodex register, model data: Hyundai Hydraulic Excavator, CM-SV: What Do the Letters of Each Brand and Model of Excavator Mean, Machineryline: Overview of Hyundai R Series Excavators

Technical data

Engine

Engine modelS6S-DTcorrect
Power127.7 hp (86.5 kW)correct
Rated speed2,100 rpmcorrect
Torque416.2 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement4,998.1 cm³correct
AspirationTurbocharged and Charge air cooledcorrect
Coolant capacity30.3 lcorrect
Engine oil capacity16.7 lcorrect

Dimensions and weights

Ground clearance460.2 mmcorrect
Unladen weight19,260 kgcorrect

Working data

Pump flow336.1 l/mincorrect
Hydraulic oil capacity240.4 lcorrect
Hydraulic pressure323.4 barcorrect
Fuel tank capacity260.1 lcorrect

Other data

Cab height2,916.9 mmcorrect
System voltage24 Vcorrect

More machines with this engine (S6S-DT, 8)

Where this model stands

Power-to-weight ratio: 4.5 kW/t (86 kW / 19.3 t)

Stronger than 34% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hyundai R180LCD-7 have?

The Hyundai R180LCD-7 delivers 128 hp.

How much does the Hyundai R180LCD-7 weigh?

The unladen weight is 19,260 kg.

What engine does the Hyundai R180LCD-7 have?

6 cylinders, 4,998 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare