Hummel SHW35
Built: 2009 · Series: Other models
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hummel SHW35 – EU class O2 trailer: 3,500 kg gross vehicle weight, 2,540 kg payload, six wheels, 2.00 m width, built in 2009.
With a gross weight of 3,500 kg, the Hummel SHW35 sits at the upper limit of EU trailer class O2, which covers trailers from 750 kg to 3,500 kg gross weight. Trailers in this class are towed by cars, light commercial vehicles or small tractors and cover the needs of trades, agriculture and private transport. Bodywork ranges from an open platform to a closed box, depending on the cargo to be carried.
Read on 3 more paragraphs
With an unladen weight of 960 kg, payload comes to 2,540 kg. On six wheels, the trailer runs on three axles; the axle spacing within that axle group is 597 mm. At 2.00 m wide, it remains a narrow, manoeuvrable trailer for towing behind smaller tow vehicles.
Class O2 trailers usually run with a simple overrun brake rather than an air brake system: as the towing vehicle brakes, the drawbar pushes against a damper and automatically triggers the trailer's brakes. Because the gross weight exceeds 750 kg, licence category B alone is not enough; towing this trailer requires category BE. Even in this class, the coupling head, usually a ball coupling, needs regular checking for wear, since it is the trailer's only connection to the towing vehicle.
When buying a used unit, the chassis number on the type plate should match the vehicle papers before looking at technical details. Check the tyres for age, tread depth and sidewall cracking, check the coupling for play at the ball head or eye, inspect the brake lines for corrosion, and test the jockey wheels or support legs for smooth operation. Any spare wheel and its mounting, where fitted, should also be included in the check.
Sources: SpecCodex-Register: Kennwerte des Modells Hummel SHW35, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 2,000 mmcorrect |
|---|---|
| Wheelbase | 597 mmcorrect |
| Unladen weight | 960 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Hummel SHW35 weigh?
The unladen weight is 960 kg.
What is the gross vehicle weight of the Hummel SHW35?
3,500 kg.
Up to what speed is the Hummel SHW35 approved?
Approved up to 100 km/h.
When was the Hummel SHW35 built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.