Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Hürlimann / Slh › H series › H-5116 T (A)

Hürlimann / Slh H-5116 T (A)

Built: 1984–1989 · Series: H-Baureihe

More machines from model year 1984

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hürlimann / Slh H-5116 T (A) belongs to the H series. Production: 1984–1989. The engine delivers 110 hp (80.9 kW), has 5 cylinders, with a displacement of 5,702 cm³. Torque is 410 Nm. Rated speed is 2,200 rpm. The machine is 4,231 mm long, 2,120 mm wide and 2,695 mm high. The unladen weight is 4,200 kg. The wheelbase measures 2,767 mm. Ground clearance is 660 mm. Top speed is 25 km/h. Transmission: 20 V/12 R or 24 V/12 R. The engine is water-cooled. Tyres: front 10.00-16 ASF (A: 16.9-24 AS), rear 18.4-34 AS. The fuel is diesel. The bore measures 110 mm. The stroke is 120 mm. The compression ratio is 16:1. Maximum torque is reached at 1,300 rpm. Construction: unit construction (no separate frame). Around 173 units were built. The H-Baureihe series covers 3 models. Rated output within it ranges from 110 to 165 hp; the H-5116 T (A) sits at the bottom of that range with 110 hp. Its immediate neighbours are the H-6136 (A) above it with 130 hp. Unladen weight within it ranges from 4,200 to 6,650 kg; here the H-5116 T (A) sits at the bottom of that range with 4,200 kg. 5 Hürlimann / Slh models across 2 series are on record.

Hürlimann H series – five- and six-cylinder diesels from the SLH era, 5,702 to 6,842 cc, 81 to 121 kW, up to 670 Nm, kerb weight 4,200 to 6,650 kg

Hürlimann's H series was built under the SAME Lamborghini Hürlimann (SLH) cooperation, founded in 1979, from which today's SDF group headquartered in Treviglio later emerged. The register lists the types H-5116 T, H-6136 and H-6170 here, each in the four-wheel-drive version (A), from the upper output segment of the series. The models are built around five- and six-cylinder diesel engines, with the type number, as with other Hürlimann series, indicating cylinder count and power class, marking the upper end of what the brand offered in drawbar power at the time.

Read on 3 more paragraphs

The register lists 3 versions here with 80.9 to 121.4 kW from five- and six-cylinder diesel engines of 5,702 to 6,842 cc, torque of 410 to 670 Nm at 2,200 to 2,260 rpm, kerb weights of 4,200 to 6,650 kg, lengths of 4,231 to 4,740 mm, widths of 2,120 to 2,220 mm and heights of 2,695 to 2,830 mm.

With its power class the H series covered the upper segment of Hürlimann tractors and competed with comparable large tractors from Deutz-Fahr, Fendt and Case IH, used at the same time in professional arable farming and contracting; the standard four-wheel drive was sought after for heavy tillage with large mounted implements.

When buying a used H model, the key points are the condition of the engine and turbocharger, wear on clutch and gearbox given the series' high torque, and tightness of the hydraulics and four-wheel-drive hub, plus corrosion on cab and chassis and the function of the trailer brake valves; spare parts for the SLH-era series now run through the SDF group's parts channels.

Sources: SpecCodex register, model data: Hürlimann H-Baureihe, Hürlimann (Hersteller, SDF-Gruppe)

Technical data

Engine

Fueldieselcorrect
Power110 hp (80.9 kW)correct
Rated speed2,200 rpmcorrect
Torque410 Nmcorrect
Speed at max. torque1,300 rpmcorrect
Cylinders5correct
Displacement5,702 cm³correct
Bore110 mmcorrect
Stroke120 mmcorrect
Compression ratio16correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,231 mmcorrect
Width2,120 mmcorrect
Height2,695 mmcorrect
Wheelbase2,767 mmcorrect
Ground clearance660 mmcorrect
Unladen weight4,200 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox20 V/12 R or 24 V/12 Rcorrect
Front tyres10.00-16 ASF (A: 16.9-24 AS)correct
Rear tyres18.4-34 AScorrect
Top speed25 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built173correct

Where this model stands

Power-to-weight ratio: 19.3 kW/t (81 kW / 4.2 t)

Power class: Large (100–180 hp)

Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hürlimann / Slh H-5116 T (A) have?

The Hürlimann / Slh H-5116 T (A) delivers 110 hp.

How much does the Hürlimann / Slh H-5116 T (A) weigh?

The unladen weight is 4,200 kg.

What engine does the Hürlimann / Slh H-5116 T (A) have?

5 cylinders, 5,702 cm³ displacement, Diesel.

How fast does the Hürlimann / Slh H-5116 T (A) go?

Top speed is 25 km/h.

What are the dimensions of the Hürlimann / Slh H-5116 T (A)?

4,231 mm × 2,120 mm × 2,695 mm.

When was the Hürlimann / Slh H-5116 T (A) built?

Production years: 1984–1989.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare