Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Hoyer › HMC2 › HMC2 160M2-2

Hoyer HMC2 160M2-2

Series: HMC2

The photo shows the HMC2 180L-4 from the same series. Source: pcdetail.taobao.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the HMC2 160M2-2, Hoyer offers a three-phase induction motor in the HMC2 series. The rated output is 15 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 160 M in foot-mounted form. The efficiency is 91.6 per cent at full load, 92.1 per cent at 75 per cent load and 91.4 per cent at half load. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). The HMC2 series covers 30 models. Rated output within it ranges from 11 to 160 kW; the HMC2 160M2-2 sits at the bottom of that range with 15 kW. Its immediate neighbours are the HMC2 160M1-2 below it with 11 kW and the HMC2 160L-2 above it with 18.5 kW. 97 Hoyer models across 5 series are on record.

Hoyer HMC2 – register of three-phase motors in the upper power range: 30 versions, 11 to 160 kW, 2- to 6-pole, protection ratings IP23 to IP66, frame sizes 160 to 315, made in China

The HMC2 range at Hoyer covers three-phase motors in the upper power range, whose model name carries frame size and version directly, for example HMC2 200L1-2 for the two-pole version of frame size 200L1 or HMC2 280M-4 for the four-pole 280M version.

Read on 3 more paragraphs

The register lists here 30 versions with 11 to 160 kW, two- to six-pole, at a uniform mains voltage of 400 V. Full-load efficiencies range from 89.97 to 95.24% and at 75% load from 90.34 to 95.35%. Frame sizes run from 160 to 315 under IEC; the range covers protection ratings from IP23 to IP66 and mounting codes from the B3 foot mount to vertical forms such as V18 and V19, made in China and tested to the GEMS 2019 determinations with test method 2-1-1B.

With outputs from 11 to 160 kW, HMC2 targets medium to large industrial drives for pumps, fans, compressors and conveyors, where the wide choice of protection ratings and mounting forms allows use from dry indoor spaces to outdoor installation.

When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, protection rating and mounting code; on the larger frame sizes from 250 upward it is also worth checking the rolling-bearing lubrication and any relubrication fittings.

Sources: SpecCodex register, model data: Hoyer HMC2

Technical data

Engine

Rated output15 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP23, IP44, IP55, IP56, IP57, IP65, IP66correct
Frame size160 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B14, B35, V1, V3, V5, V6, V18, V19correct
Efficiency at full load91.57 %correct
Efficiency at 75 % load92.11 %correct
Efficiency at half load91.43 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Hoyer HMC2 160M2-2 have?

The Hoyer HMC2 160M2-2 delivers 15 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare