Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Hoyer › HMA3 › HMA3 90S-2

Hoyer HMA3 90S-2

Series: HMA3

Source: it.sohu.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hoyer HMA3 90S-2 is a three-phase induction motor from the HMA3 series. The rated output is 1.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 90 S in foot-mounted form. The efficiency is 84.9 per cent at full load, 85.3 per cent at 75 per cent load and 83.8 per cent at half load. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). The HMA3 series covers 22 models. Rated output within it ranges from 0.75 to 7.5 kW; the HMA3 90S-2 sits at the bottom of that range with 1.5 kW. Its immediate neighbours are the HMA3 90S-4 below it with 1.1 kW and the HMA3 100L1-4 above it with 2.2 kW. 97 Hoyer models across 5 series are on record.

Hoyer HMA3 – the range of three-phase motors with multiple protection ratings up to IP66, frame sizes 80 to 132, 0.75 to 7.5 kW, 2- to 6-pole, fully classified High Efficiency Level 2018

Hoyer Motors is a Danish maker of three-phase motors that has its ranges built in China. The HMA3 range covers the small and medium IEC frame sizes; type designations follow the scheme of frame size, build length and pole count, such as HMA3 100L-2 for frame size 100, length L, two-pole. A defining feature of the range is its broad protection-rating approval: each of the 22 motors is certified simultaneously for IP23, IP44, IP55, IP56, IP57, IP65 and IP66, covering several operating environments with one build.

Read on 3 more paragraphs

The register lists here 22 versions with 0.75 to 7.5 kW, two- to six-pole, full-load efficiencies from 79.03 to 90.5% and at 75% load from 78.43 to 91.22%. Frame sizes run from 80 to 132, supply voltage is uniformly 400 V. Manufacturing is in China, testing used test method 2-1-1B under the 2019 GEMS determination; all 22 motors reach the 2018 High Efficiency Level.

With its multiple protection-rating certification and uniform 2018 efficiency class, Hoyer positions the HMA3 range in the European and Australia-Pacific market as a standard industrial motor whose mounting position and environment can change by application, from the factory floor to outdoor use, without switching ranges.

When buying used, bearing condition and a checked insulation resistance of the winding, the condition of shaft, key and fan cover, and a legible nameplate with frame size, pole count and mounting code matter; given the wide choice of mounting codes up to the vertical forms V18 and V19, the actual installation should be matched against the approved form. Spares run through Hoyer's distribution.

Sources: SpecCodex register, model data: Hoyer HMA3

Technical data

Engine

Rated output1.5 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP23, IP44, IP55, IP56, IP57, IP65, IP66correct
Frame size90 S (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B14, B35, V1, V3, V5, V6, V18, V19correct
Efficiency at full load84.87 %correct
Efficiency at 75 % load85.33 %correct
Efficiency at half load83.85 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Hoyer HMA3 90S-2 have?

The Hoyer HMA3 90S-2 delivers 1.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare