Holder GmbH Grunbach E 6 / E 6 G
Built: 1959–1974 · Series: E
More machines from model year 1959
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Holder single-axle tractors E 6 to E 11, EB, ED and EF – the early Metzingen walking tractors: E for single-axle, the number as hp class, B, D and F for petrol, diesel and bought-in engine
This range gathers Holder's early single-axle tractors, which sit in a second maker record of the register: E 6, E 7 and E 11, the variants EB, ED and EF and the post-war types BED II and ED 10 – machines with which the crop-protection maker from Metzingen relieved the vintners and gardeners of the Swabian Alb and the Neckar valley of hand labour from the 1930s. The type logic: E stands for the single-axle tractor (Einachser), the number for the hp class – E 6 about 6 hp, E 11 about 11 hp – and the second letter for the engine: B for petrol, D for diesel, F for the bought-in engine of a supplier such as ILO or Sachs; G on the E 6 G marks a version variant. The engines are single-cylinders – two-stroke petrol engines on 1:25 mixture revving to 3,000 rpm, and small four-stroke diesels running slowly – with displacements from 191 to 499 cm³.
Read on 3 more paragraphs
The register lists 8 versions with 3.8 to 7.5 kW from single-cylinders of 191 to 499 cm³, weights from 108 to 520 kg, widths from 600 mm and heights from 820 to 1,030 mm.
Until the 1960s the single-axle tractor was the smallholding's draught power: it pulled plough, tiller and trailer, drove pump and sprayer via the belt pulley and was guided by handlebars – the Holder E types are among the most-built of this class in southern Germany.
Used, they are collectors' and enthusiasts' pieces; compression and ignition, clutch, gearbox and belt pulley, the condition of handlebars and implements and parts supply through vintage specialists count.
Sources: SpecCodex register, model data: Holder E (Einachser), Max Holder GmbH (manufacturer)
Technical data
Engine
| Fuel | Benzin/Öl-Gemisch 25:1correct |
|---|---|
| Power | 5 hp (3.8 kW)correct |
| Cylinders | 1correct |
| Displacement | 191 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Height | 820 mmcorrect |
|---|---|
| Unladen weight | 108 kgcorrect |
Drivetrain and chassis
| Drive | single-axle drivecorrect |
|---|---|
| Gearbox | (V+R)*3 + Scorrect |
| Front tyres | 4.00 - 8 AS / 4.00 - 12 AScorrect |
| Top speed | 13 km/hcorrect |
Origin and approval
| Construction | Blockkonstruktioncorrect |
|---|---|
| Units built | ca. 19.500correct |
Where this model stands
Power-to-weight ratio: 35.2 kW/t (4 kW / 0.1 t)
Power class: Compact (< 40 hp)
Stronger than 0% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Holder GmbH Grunbach E 6 / E 6 G have?
The Holder GmbH Grunbach E 6 / E 6 G delivers 5 hp.
How much does the Holder GmbH Grunbach E 6 / E 6 G weigh?
The unladen weight is 108 kg.
What engine does the Holder GmbH Grunbach E 6 / E 6 G have?
1 cylinders, 191 cm³ displacement, Benzin/Öl-Gemisch 25:1.
How fast does the Holder GmbH Grunbach E 6 / E 6 G go?
Top speed is 13 km/h.
When was the Holder GmbH Grunbach E 6 / E 6 G built?
Production years: 1959–1974.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.