Technical register for agricultural, construction and commercial machinery · sourced data

Hitachi ZX190W-6

Series: Hitachi Mobile Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ZX190W-6 from Hitachi is part of the Hitachi Mobile Excavator series. The engine delivers 122.3 kW, has 4 cylinders, with a displacement of 5,201.3 cm³. The engine comes from Isuzu. Rated speed is 2,000 rpm. The unladen weight is 19,700 kg. The wheelbase measures 2,651.8 mm. Ground clearance is 350.5 mm. The tank holds 290.3 litres. Maximum torque is reached at 1,800 rpm. The pump delivers 236.2 l/min. The engine fitted is the 4HK1. The Hitachi Mobile Excavator series covers 11 models. Rated output within it ranges from 49.2 to 122.3 kW; the ZX190W-6 sits at the top of that range with 122.3 kW. Its immediate neighbours are the ZX190W-3 below it with 118.9 kW. Unladen weight within it ranges from 6,780 to 22,629 kg; here the ZX190W-6 sits in the upper part of that range with 19,700 kg. 357 Hitachi models across 24 series are on record.

Hitachi wheeled excavators EX60WD and Zaxis ZX130W to ZX220W – W for Wheel, the number as weight class, generations -3 and -6, Isuzu engines 4BG1 to 4HK1, 49 to 122 kW

Hitachi's wheeled excavators are the wheeled versions of the Zaxis range for the European market, where the excavator on wheels is the standard machine in road and sewer work; the EX60WD-2 of the 1990s stands at the start, the Zaxis models from 2001 form the programme. The type logic: ZX stands for Zaxis, the number gives the weight class in hundreds of kilograms – ZX130W about 13 t, ZX170W 17 t, ZX210W 21 t – W for Wheel, the wheeled excavator, the digit after the hyphen the generation: -3 from 2006 with Stage IIIA, -6 from 2016 with Stage IV. The engines come from Isuzu – 4BG1 and 6BG1 in the early, 4HK1 and 4JJ1 in the younger models – as in all Hitachi excavators.

Read on 3 more paragraphs

The register lists 11 versions with 49.2 to 122.3 kW from four- and six-cylinders of 2,955 to 6,494 cm³ at rated speeds of 2,000 to 2,500 rpm and operating weights from 6,780 to 22,629 kg.

Hitachi's wheeled excavators are built for Europe at the Amsterdam plant, which pairs the Japanese upper structures with European undercarriages, offset booms and outriggers; the hydraulics are those of the crawler excavators, which secures Hitachi its reputation for fine control on wheels too.

On used machines, operating hours, play in slew ring and boom bearings, the condition of tyres, outrigger pads and oscillating axle, leak-free cylinders and swivel joint and, on -6 models, the aftertreatment service history are what count.

Sources: SpecCodex register, model data: Hitachi Mobilbagger, Hitachi Construction Machinery Europe (manufacturer)

Technical data

Engine

Engine makeIsuzucorrect
Engine model4HK1correct
Power122.3 kWcorrect
Rated speed2,000 rpmcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders4correct
Displacement5,201.3 cm³correct
AspirationTurbocharged, intercooledcorrect

Dimensions and weights

Width2,730.2 mmcorrect
Wheelbase2,651.8 mmcorrect
Ground clearance350.5 mmcorrect
Unladen weight19,700 kgcorrect

Working data

Pump flow236.2 l/mincorrect
Fuel tank capacity290.3 lcorrect

More machines with this engine (Isuzu 4HK1, 4)

Where this model stands

Power-to-weight ratio: 6.2 kW/t (122 kW / 19.7 t)

Stronger than 59% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hitachi ZX190W-6 have?

The Hitachi ZX190W-6 delivers 122 kW.

How much does the Hitachi ZX190W-6 weigh?

The unladen weight is 19,700 kg.

What engine does the Hitachi ZX190W-6 have?

4 cylinders, 5,201 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare