Hitachi ZX 200 (LOG LOADER)
Series: Hitachi Log Loader
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | AA-6BG1Tcorrect |
|---|---|
| Displacement | 6,494.2 cm³correct |
Dimensions and weights
| Length | 13,722.1correct |
|---|---|
| Width | 3,630.2correct |
| Ground clearance | 713.2correct |
| Unladen weight | 31,383 kgcorrect |
Working data
| Pump flow | 438.4 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 130.2 lcorrect |
| Hydraulic pressure | 343.4correct |
| Fuel tank capacity | 1,018.3 lcorrect |
Other data
| Height | 3,310.1correct |
|---|
Frequently asked questions
How much does the Hitachi ZX 200 (LOG LOADER) weigh?
The unladen weight is 31,383 kg.
What engine does the Hitachi ZX 200 (LOG LOADER) have?
6,494 cm³ displacement.
What are the dimensions of the Hitachi ZX 200 (LOG LOADER)?
13,722 mm × 3,630 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.