Hfr SK20
Built: 2004-2004 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hfr – other models: collective page of tippers and semi-trailers outside the named ranges, type codes PK, SK, SB and PM, 3.2–11.8 t unladen weight, up to 46 t gross weight, up to 14.52 m length
This page gathers the Hfr trailers the register could not assign to a named range. The type designations follow short letter-number combinations such as PK24, SK20, SB240 or KK24, each marking a range within the maker's programme. Individual model designations in the register are in Danish, such as UOPLYST, meaning not specified.
Read on 3 more paragraphs
The register lists here 50 versions with unladen weights from 3,200 to 11,800 kg, gross vehicle weights from 10,000 to 46,000 kg, lengths from 5.34 to 14.52 m and widths from 2.40 to 2.60 m.
The span from 10 to 46 t gross vehicle weight covers both smaller two-axle semi-trailers and multi-axle semi-trailers for general freight and tipper work. Trailers like these serve regional and international road haulage as well as the transport of building materials and agricultural goods. Such semi-trailers often pass from one haulage company to another several times on the used market before reaching the end of their working life.
When buying used, what counts is the condition of the frame and loading deck for rust and deformation, the condition of the brake system and drums, axles and wheel bearings, and on tippers additionally the hydraulic rams and tipping body for leaks and wear, and on semi-trailers the kingpin and fifth wheel. Lighting, underrun protection and tarpaulins should also be checked.
Technical data
Dimensions and weights
| Length | 13,620 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 7,550 kgcorrect |
| Gross vehicle weight | 35,000 kgcorrect |
Frequently asked questions
How much does the Hfr SK20 weigh?
The unladen weight is 7,550 kg.
What is the gross vehicle weight of the Hfr SK20?
35,000 kg.
What are the dimensions of the Hfr SK20?
13,620 mm × 2,600 mm.
When was the Hfr SK20 built?
Production years: 2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
-, UOPLYST
0497 HFR
12X80
2 AXLE CENTRALAXTRAILER
2 AXSLE FULL TRAILER
2 axle dolly
2 axle semi trailer
253X830/20000
3 axle semi trailer
366/137
A TANK-SLÄPVAGN
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.