StartHarvesting machineryHesston › 9365 Self-Propelled

Hesston 9365 Self-Propelled

Series: Hesston Swather

Photo from this series — not necessarily this version.Wikimedia Commons · CC BY-SA 2.0 · Mick Garratt · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 9365 Self-Propelled from Hesston is part of the Hesston Swather series. The engine with a displacement of 6,604 cm³. Top speed is 24.1 km/h. The tank holds 378.5 litres. The engine fitted is the Diesel 6,6 CTA. 25 Hesston models across 2 series are on record. The model is listed under Harvesting machinery. 7 verified figures from 1 source are on file.

Technical data

Engine

Engine modelDiesel 6.6 CTAcorrect
Displacement6,604 cm³correct

Dimensions and weights

Width3,950.2correct

Drivetrain and chassis

Gearbox typehydrostatic transmission - 2 Speedcorrect
Top speed24.1 km/hcorrect

Working data

Fuel tank capacity378.5 lcorrect

Other data

Height3,389.4correct

Frequently asked questions

What engine does the Hesston 9365 Self-Propelled have?

6,604 cm³ displacement.

How fast does the Hesston 9365 Self-Propelled go?

Top speed is 24.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare