Hesston 9230

Series: Hesston Swather

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 9230 from Hesston is part of the Hesston Swather series. The engine with a displacement of 3,293.8 cm³. Rated speed is 2,600 rpm. Ground clearance is 1,010.2 mm. Top speed is 17.7 km/h. The tank holds 227.1 litres. The hydraulic tank holds 87.1 litres. The oil fill is 10.6 litres. The electrical system runs on 12 V. The engine fitted is the Diesel B3,3T. 25 Hesston models across 2 series are on record. The model is listed under Harvesting machinery. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine modelDiesel B3.3Tcorrect
Rated speed2,600 rpmcorrect
Displacement3,293.8 cm³correct
Aspirationturbochargedcorrect
Engine oil capacity10.6 lcorrect

Dimensions and weights

Width3,724.7correct
Ground clearance1,010.2correct

Drivetrain and chassis

Top speed17.7 km/hcorrect
System voltage12 Vcorrect

Working data

Hydraulic oil capacity87.1 lcorrect
Fuel tank capacity227.1 lcorrect

Other data

Height3,358.9correct

Frequently asked questions

What engine does the Hesston 9230 have?

3,294 cm³ displacement.

How fast does the Hesston 9230 go?

Top speed is 17.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare