Hesston 8250S
Series: Hesston Swather
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | Diesel 4B T3.9correct |
|---|---|
| Rated speed | 2,500 rpmcorrect |
| Displacement | 3,916.5 cm³correct |
| Aspiration | turbochargedcorrect |
| Engine oil capacity | 10.6 lcorrect |
Dimensions and weights
| Width | 3,706.4correct |
|---|---|
| Ground clearance | 950.2correct |
Drivetrain and chassis
| Top speed | 19.3 km/hcorrect |
|---|---|
| System voltage | 24 Vcorrect |
Working data
| Hydraulic oil capacity | 87.1 lcorrect |
|---|---|
| Fuel tank capacity | 227.1 lcorrect |
Other data
| Height | 3,310.1correct |
|---|
Frequently asked questions
What engine does the Hesston 8250S have?
3,916 cm³ displacement.
How fast does the Hesston 8250S go?
Top speed is 19.3 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.