Hermann Lanz D 47 – specifications
Built: 10/1949–12/1954 · Series: 47-Baureihe
With the D 47, Hermann Lanz offers a model from the 47 series. Production: 10/1949–12/1954. The engine delivers 22 hp (16.1 kW), has 2 cylinders, with a displacement of 2,198 cm³. The machine is 2,900 mm long, 1,540 mm wide and 1,500 mm high. The unladen weight is 1,600 kg. The wheelbase measures 1,800 mm. Ground clearance is 360 mm. Top speed is 20 km/h. Transmission: 5V/1R. The engine is water-cooled. Tyres: front 5.50 x 16, rear 9.00 x 24. The fuel is diesel. The bore measures 100 mm. The stroke is 140 mm. Construction: unit construction (no separate frame). Injection pressure is 100 bar. Around 355 units were built. Rated output across the Hermann Lanz range ranges from 11 to 60 hp; the D 47 sits in the lower part of that range with 22 hp. Its immediate neighbours are the D 20 below it with 20 hp and the D 527 above it with 24 hp. Rated output across the Hermann Lanz range ranges from 8.1 to 43.9 kW; here the D 47 sits in the lower part of that range with 16.1 kW. 48 Hermann Lanz models across 8 series are on record.
Data for the version built 10/1949–12/1954 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1949
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hermann Lanz D 47: water-cooled two-cylinder diesel tractor with 2,198 cc, 16.1 kW and 1,600 kg from October 1949 to December 1954
Hermann Lanz was a tractor manufacturer independent of Heinrich Lanz AG in Mannheim, based in Aalen. In the early 1950s the 47 series was among the smaller versions in the company's range, aimed at farms that needed a simple diesel tractor without large engine output.
Read on 3 more paragraphs
The D 47 is powered by a water-cooled two-cylinder engine of 2,198 cc, running at either 1,500 or 1,600 rpm and producing 22 hp, or 16.1 kW. At a weight of 1,600 kg, a length of 2,900 mm, a height of 1,500 mm, a width of 1,540 mm and a wheelbase of 1,800 mm, the machine reaches a top speed of 20 km/h.
The two available engine speeds allowed a choice between the standardised PTO speed for driven implements and a higher speed for pure pulling work. A two-cylinder engine of this size was built for light to medium field work, not for heavy tillage of large areas. Its simple construction with few components made repairs straightforward under ordinary farm workshop conditions, an advantage for smaller operations without specialist tools.
When buying, the condition of the injection pump and injectors matters, along with the radiator and water pump for leaks. The gearbox, clutch and brakes should be checked for wear, and the frame for rust; spare parts for this small and now rare manufacturer are only available through a specialist circle of collectors.
Sources: SpecCodex-Register: Kennwerte des Modells Hermann Lanz D 47
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 22 hp (16.1 kW)correct |
| Rated speed | 1500/1600 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 2,198 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 140 mmcorrect |
| Injection pressure | 100 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,900 mmcorrect |
|---|---|
| Width | 1,540 mmcorrect |
| Height | 1,500 mmcorrect |
| Wheelbase | 1,800 mmcorrect |
| Ground clearance | 360 mmcorrect |
| Unladen weight | 1,600 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 5V/1Rcorrect |
| Front tyres | 5.50 x 16correct |
| Rear tyres | 9.00 x 24correct |
| Top speed | 20 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 355correct |
Frequently asked questions
Where this model stands
Power-to-weight ratio: 10.1 kW/t (16 kW / 1.6 t)
Power class: Compact (< 40 hp)
Stronger than 9% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.